Advertisement
Quick Links
Luminite Genesis product range
Wireless PIR detectors
G1 Wireless PIR's
30m x 20m
G1 Wireless PIR's
15m x 20m
G1 Wireless PIR's
40m x 4.5m
G1 Wireless PIR's
12m Horizontal curtain
G1 Wireless PIR's
12m Vertical curtain
G2 Wireless PIR's
30m x 20m
G2 Wireless PIR's
60m x 4m
Wireless Accessories
IP Masthead/Repeater
Masthead/Repeater
Masthead Relay Unit
Relay Expansion Module
Walk Test Instrument
16 way relay unit
Relay module
16 way DM interface unit
16 way relay unit with end of line resistor
Relay module with end of line resistor
Optional antenna
Transmitter module
Hard wired PIR detectors
G1 Wired PIR's
30m x 20m
G1 Wired PIR
15m x 20m
G1 Wired PIR
40m x 4.5m
G1 Wired PIR
12m horizontal curtain
G1 Wired PIR
12m vertical curtain
G2 Wired PIR's
30m x 20m
G2 Wired PIR's
60m x 4m
LUMINITE ELECTRONICS LTD, 2a BELLEVUE ROAD, FRIERN BARNET, LONDON, N11 3ER
Tel: 0044 (0) 208 368 7887 Fax: 0044 (0) 208 368 3952
Web: www.luminite.co.uk email: sales@luminite.co.uk
LGWP3020
LGWP1520
LGWP4004
LGWP12HC
LGWP12VC
LG2WP3020
LG2WP6004
LGIP MT434
LGMT434
LGMRU4x4
LGREM4x4
LGWT434
LGRU16
LGRM8
LGDM16
LGRU16ELR 3 versions
LGRM8ELR 3 versions
AE434
LGTX434
LGHW3020
LGHW1520
LGHW4004
LGHW12HC
LGHW12VC
LG2HW3020
LG2HW6004
Wireless
Wireless
PIR Detector
PIR Detector
Installation
Installation
Handbook
Handbook
Type: LG2 WP-3020 & WP-6004
2a BELLEVUE ROAD, FRIERN BARNET, LONDON, N11 3ER
Tel: 0044 (0) 208 368 7887 Fax: 0044 (0) 208 368 3952
V2 Issue 1
Advertisement
Related Manuals for Genesis LG2 WP-3020
Summary of Contents for Genesis LG2 WP-3020
- Page 1 LG2HW3020 G2 Wired PIR’s 60m x 4m LG2HW6004 Type: LG2 WP-3020 & WP-6004 V2 Issue 1 2a BELLEVUE ROAD, FRIERN BARNET, LONDON, N11 3ER Tel: 0044 (0) 208 368 7887 Fax: 0044 (0) 208 368 3952 LUMINITE ELECTRONICS LTD, 2a BELLEVUE ROAD, FRIERN BARNET, LONDON, N11 3ER Tel: 0044 (0) 208 368 7887 Fax: 0044 (0) 208 368 3952 Web: www.luminite.co.uk email: sales@luminite.co.uk...
-
Page 2: Pre-Installation Notes
Temperature -10 +70 detector by following the instructions on page 11. LG2 WP-3020 & WP-6004 Wireless PIR Detector Installation Handbook Page 2. LG2 WP-3020 & WP-6004 Wireless PIR Detector Installation Handbook Page 15. -
Page 3: Testing And Commissioning
Luminite Electronics Ltd acknowledge all registered trademarks. Luminite Electronics Ltd reserve the right to make changes to this handbook and to its LG2 WP-3020 & WP-6004 Wireless PIR Detector Installation Handbook Page 14. LG2 WP-3020 & WP-6004 Wireless PIR Detector Installation Handbook... - Page 4 LG2 WP-3020 & WP-6004 Wireless PIR Detector Installation Handbook Page 4. LG2 WP-3020 & WP-6004 Wireless PIR Detector Installation Handbook...
- Page 5 On the hard wired version, these alerts activate the anti AND / OR. masking relay but only momentarily. The Genesis 2 PIR detector uses a Quad in line pyro sensor which acts like two separate sensors side by side. BATTERIES.
-
Page 6: Installation
There are 32 codes to choose from and any number can be used as long as it is one side ensuring that it does not Front cover claw sockets different from other nearby sites that are using Genesis products. The get wet or contaminated. The Screw hole... - Page 7 = pulse count 1. Avoid situations where the detector can overshoot the detection area. The Genesis 2 detector uses a patented Black Mirror which filters out unwanted sunlight however it is still good practice to consider the position carefully to mini- mise the possibility of reflections.
- Page 8 Batteries: If the mirror assembly was removed, re-fit it now. Genesis 2 is supplied with two alkaline 1.5 volt C cells. (MN1400 LR14) These cells are fitted in BAT1 and BAT2 positions. Horizontal Left / Right adjustment is achieved by slackening the knurled white thumb screw and rotating the mirror assembly click by click in 10 degree steps to To turn the product on, the battery selector jumper must be fitted to the 2x1.5V...
Need help?
Do you have a question about the LG2 WP-3020 and is the answer not in the manual?
Questions and answers