Mobility Sound PTT-220-VZ User Manual

Push-to-talk

Advertisement

Federal Communication Commission
Interference Statement
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable
protection against harmful interference in a
residential installation. This equipment generates
uses and can radiate radio frequency energy and,
if not installed and used in accordance with the
instructions, may cause harmful interference to
radio communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning
the equipment off and on, the user is encouraged
to try to correct the interference by one of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment
and receiver.
- Connect the equipment into an outlet on a
circuit different from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/ TV
technician for help.
FCC Caution: Any changes or modifications not
expressly approved by the party responsible for
compliance could void the user's authority to
operate this equipment.
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation.
This equipment complies with FCC RF radiation
exposure limits set forth for an uncontrolled
environment. To maintain compliance with FCC
RF exposure compliance requirements, please
avoid direct contact to the transmitting antenna
during transmitting
RF Exposure Warning!
Please keep product 20cm away from your body
or bystander during the radio operation. The
typical handheld two-way radios were certified
under mobile usage condition
(i.e. keep 20cm away from the user body) and
use of such radio closer than 20cm may exceed
the US RF exposure limit and shall be avoided.
PTT-220-VZ PUSH-TO-TALK
USER GUIDE
For use with Zello and other push-to-talk
apps on Android smart phones
Mobility Sound PTT-220-VZ
Model No.: PTT-220-VZ
Made in Taiwan
All other product or service names are the
property of their respective owners.
© 2014 Mobility Sound Technology Ltd,,
All Rights Reserved
This manual
applies to the
Mobility Sound
PTT--220-- VZ
Push-to- Talk
transmitter

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PTT-220-VZ and is the answer not in the manual?

Questions and answers

Summary of Contents for Mobility Sound PTT-220-VZ

  • Page 1 To maintain compliance with FCC All other product or service names are the RF exposure compliance requirements, please property of their respective owners. avoid direct contact to the transmitting antenna during transmitting RF Exposure Warning! © 2014 Mobility Sound Technology Ltd,, All Rights Reserved...
  • Page 2: Controls And Connection

    Push-to-Talk device Dust Cover Used to cover the USB port when the PTT-220-VZ is not being recharged USB Charge Port Clothing Clip This port is used to connect the The alligator-type clip can...
  • Page 3 STEP ONE: Charging the Push-to-Talk The PTT-220-VZ has an internal Lithium Ion rechargeable battery pack which must be charged prior to operation, and must be recharged regularly. A fully charged battery will provide more than 12 hours of operation before needing to be recharged.
  • Page 4: Pairing With A Smart Phone

    Activate the pairing mode on the Push-to-Talk by holding down the PTT button while turning the device on. Continue to hold down the PTT button until the status LED on the PTT-220-VZ shows two blue flashes every second.
  • Page 5 Setting up The Zello APP To get the Zello app on your phone and set it up to work with the PTT-220-VZ Push-to-Talk, do the following: 1. Install Zello from your Zello@Work network, or download the app from the Google Play store (for Android) or the Apple App Store (for iOS).
  • Page 6 -Incoming calls received by Zello will be heard over the phone’s built-in speaker or through the earphone in your wired hands-free accessory, if you are using one. STATUS LED MESSAGES The meanings of the various LED messages shown by the MobilitySound PTT-220-VZ are shown on the following table LED INDICATION...
  • Page 7: Specification

    SPECIFICATION SPECIFICATION -20 ℃ to 50 ℃ Operating Temperature -40 ℃ to 80 ℃ Storage Temperature Size 65mm(H) x 30mm(W) x 17mm(D) Weight 25 grams Bluetooth version Fully qualified Bluetooth 2.1 Chip set CSR BC5 + 16MB external flash Receiver sensitivity -82 dbm (typical) Bluetooth power class Class 2...
  • Page 8: Support And Warranty

    Mobility Sound Technology Ltd., warrants this product against defects in materials or workmanship for a period of one year from the date of retail purchase. Mobility Sound will repair or replace a defective unit, at our option, without charge for parts or labor. The limited warranty is extended only to the original purchaser. It does not...

Table of Contents