Setting The Date; Setting The Alarms - Midland 74-250(C) Owner's Manual

F is for Fahrenheit and C is for Celsius.
8. Press and release the "UP or Down" button to select F or C.
9. Press and release the "SET" button to store your selection and
return to clock mode.
The day of the week will be correct when you set the Date.
When no buttons have been pressed for 10 seconds, the
current setting is confirmed and the radio switches to alert
display mode automatically. If after 30 seconds there has
been no buttons pressed the radio will revert to clock mode.

Setting the Date

From the Clock display
1. Press and release the "MODE" button, the Date will be
displayed.
2. Press and hold the "SET" button, the Year will flash.
3. Press and release the "
4. Press and release the "SET" button, the Month will flash.
5. Press and release the "
6. Press and release the "SET" button, the Day will flash.
7. Press and release the "
8. Press and release the "SET" button, to return to the Date
display.

Setting the Alarms

There are two alarms available. They are identified with a
number one and a number two inside of a bell that is
displayed next to the temperature.
• From the clock display:
1. Press and release the "MODE" button (usually twice) until
you see the bell icon on the display with a 1. This is displayed
in the upper center of the display. The time is followed by AL.
The bell icon with the number is the alarm you will be
setting.
" button, to select the Year.
UP/DOWN
" button to select the Month.
UP/DOWN
" button, to select the Day.
UP/DOWN
12