Behringer B-Control Fader BCF2000 User Manual page 18

B-CONTROL FADER BCF2000/B-CONTROL ROTARY BCR2000
This function resets the most important MIDI data to their factory
settings.
s Press EDIT and keep it pressed.
s Now press EXIT. The reset is performed as soon as you
press EXIT. “PAnC” (for “Panic”) appears in the display.
s As soon as the reset is over, your B-CONTROL goes
automatically into the play mode, and the current preset is
shown in the display.
Current value settings of the MIDI device connected to your
B-CONTROL can be transmitted to your B-CONTROL using the
data request function (provided that the MIDI device supports
this function, and a request command was defined using the editor
software). In this case, the MIDI device doesn’t send data; the B-
CONTROL requests them instead.
s Press the LEARN key while the EDIT key is kept pressed.
The request takes place, and the B-CONTROL indicates
the controller values of the receiving MIDI device on the
LED ring or through fader positions.
A Snapshot Send lets you send all current
order to transmit the B-CONTROL settings to the connected MIDI
device.
s Press the “ PRESET” key while the EDIT key is kept
pressed. The B-CONTROL now sends the current controller
settings.
In addition to the SysEx Dump function in the global setup menu,
the following key combination lets you send
:
s Press the “PRESET
pressed.
s If you want to cancel the dump, press the EXIT key.
+
values
The BCF2000 fader motors can be temporarily disengaged. To
do that, one or several fader(s) is/are assigned a key that
disengages the fader’s motor for the duration of the keystroke.
All 20 programmable keys (
s Press the EDIT key and keep it pressed.
s Move the fader(s) whose motors you wish to disengage.
s Press the key to which you want to assign the motor-off
function.
s Exit with EXIT.
+
18
” key while the EDIT key is kept
assignments
and ) are available.
4. CONTROLS
in