14
ASSEMBLING AND PREPARING
Adjusting the stand height
34UB67
29UB67
1
Stand the monitor assembled with the stand
base in an upright position
2
Remove the tape attached to the bottom
back of the stand body and then pull out the
locking pin while pressing the head down-
ward.
Stand Body
Head
Tape
Locking Pin
Locking Pin
Head
3
The height can be adjusted up to 130.0 mm.
CAUTION
Once the pin is removed, it is not necessary
y
to re-insert it to adjust the height.
WARNING
Do not put your fingers or
y
hand between the screen
and the base (chassis) when
adjusting the screen's height.
Locking Pin
130.0 mm
130.0 mm