Drive Assembly - Ds5M; Hdd - Microsoft DS5 Owner's Manual

DS5

Drive Assembly - DS5M

If your setup requires an internal drive, open the case and install a hard drive before
turning the unit on.

2.5" HDD

1. Lift the top cover off the body. If it's
already locked in place, push it
upwards with a thin and small item
through the opening at the bottom.
2. Remove the screws which are holding
the aluminium frame in place.
Page 10 / Chapter 2 - Hardware Installation
3. Lift the frame out of the plastic casing.
4. Align the screw threads of the hard
drive with the holes in the framing and
place it in the frame.
User Guide