Advertisement
Quick Links
NVR Quick Setup Guide
Front Panel
1
Power LED
2
4
Network LED
5
Rear Panel
*4 PoE NVR
*8 PoE NVR
*16 PoE NVR
1
Ip camera input
5
eSATA
2
6
Network port
HDMI
3
7
Audio out
USB 3.0
4
8
VGA out
Sensor/Alarm: I/O
>INSTALLATION AND OPERATION (1)
Record LED
3
Playback LED
USB 2.0 Port
6
IR Remote Sensor
9
USB 2.0
10
Power input
11
Power switch
SYSTEM SETUP
When power is turned on, you will see the initializing screen and
it may take up to one minute to complete. After initializing is
complete, an Easy Setup screen will appear.
Easy Setup Wizard
An Easy Setup screen will appear. If you don't want to go through
the setup steps at this time click the Exit button and the system
will go to the main live screen. When you want to set up the system
just click the Easy Setup Menu or Main menu in the right-click mouse
menu. If the Easy Setup is finished and returns to the live screen,
the auto connected camera image will be displayed on the live screen.
The NVR system will record automatically as regular recording.
* For basic system setup and configuration it is recommended to
complete all the setup steps.
IP Camera Registration
You can check the IP camera list and register the desired IP cameras
automatically or manually. If the cameras are connected directly
to the IP CAM port, the NVR system will register the cameras
automatically. If the cameras are connected to the switch/hub,
the NVR system will discover the cameras automatically and then
you can register the cameras to the NVR by clicking the "Registration".
Advertisement
Related Manuals for ATV NVR
Summary of Contents for ATV NVR
- Page 1 You can check the IP camera list and register the desired IP cameras automatically or manually. If the cameras are connected directly to the IP CAM port, the NVR system will register the cameras automatically. If the cameras are connected to the switch/hub, the NVR system will discover the cameras automatically and then you can register the cameras to the NVR by clicking the "Registration".
-
Page 2: Ip Camera Setup
NVR Quick Setup Guide >INSTALLATION AND OPERATION (2) IP Camera Setup The user can set up the IP camera details: Profile, Resolution, FPS, Quality, GOP, Motion, Sensor and Audio. For motion detection and event recording function, the user must select the Motion as ON position. -
Page 3: Recording Schedule Setup
Manual add: To manually add an ONVIF compliant camera Using direction keys and ENTER button, choose preferred record * The NVR will set the motion area in the full screen. If the user the user must enter the full IP address. -
Page 4: Network Connection Setup
NVR Quick Setup Guide >INSTALLATION AND OPERATION (4) Network Connection Setup GENERAL OPERATION You can set up the network connection route and protocol. Connection Mode: Sets the network connection mode. After Easy Setup is completed or exited from Easy Setup menu, Bandwidth: Sets the maximum data flow to be transferred a live screen will appear. -
Page 5: Live Launcher
Protect: You can protect recorded data from HDD overwriting Resolution Button: select resolution and adjustments in single channel mode. Record Button: to enable recording on your NVR. Press it again and will disable recording. Backup: Backup your data by using USB Drive or External HDD PTZ Control Button: Can control your PTZ camera that’s connected to the NVR.