Table of Contents
Advertisement
Changing the Line Port
The optional extra G3 interface unit is required.
When the extra G3 interface unit is in-
stalled, you can connect to a maxi-
mum of three ports.
Note
❒ When you install the extra G3 in-
terface unit, you can specify the
line port home position from "Gen.
Settings/Adjust". See p.130 "Gen-
eral Settings/Adjustment".
❒ When sending a fax, you can select
the line port if dialing with the
number keys or Chain Dial.
❖ ❖ ❖ ❖ G3
G3 is selected after power up or
when the machine is reset. If you
install the extra G3 interface unit,
you can select "G3-1", "G3-2","G3-
3", or "G3-Auto"depending on the
number of the installed unit.
❖ ❖ ❖ ❖ Multi-port
When the extra G3 interface unit is
installed, communications can
take place simultaneously through
two lines at once.
The following list shows protocol
combinations available for each
line type.
Option
Available
line types
Without
PSTN
option
Extra G3
PSTN+PS
interface
TN
unit
Extra G3
PSTN+PS
interface
TN+PSTN
unit
+
Extra G3
interface
unit
Note
❒ A maximum of three communi-
cations can take place simulta-
neously.
❒ You cannot perform three Im-
mediate Transmissions simulta-
neously.
❒ If three communications are in
progress, the display shows the
first communication that was
initiated.
Changing the Line Port
Available
protocol
combinations
G3
G3+G3
G3+G3+G3
4
53
Advertisement
Table of Contents
