Setup And Operation - LightwaveRF JSJS LW901 Operation Manual

Mounting of Room Thermostat
The LightwaveRF Room Thermostat is designed to be
mounted in the same room as the LightwaveRF
Radiator Valves that it controls.
1. First of all, nd an
appropriate mounting
location, making sure
that no electricity or
similar lines run there.
2. Use a pen to mark the
bore hole positions (a) of
the wall mount on the
wall.
3. If you are working with a stone wall, you should
drill the holes using a 5 mm drill. Then insert a plug
into each of the drilled holes. If you are working with
a wooden wall, you should drill the marked holes (a)
using a 1.5 mm drill.
4. Now use screws to x the wall mount to the wall.
5. Slide the Room Thermostat down from above onto
the wall mount.
SETUP & OPERATION:
1. Setting the date and time of day
The rmware version number will be displayed brie y
once you have inserted/replaced the batteries and
then you will be automatically prompted to set the
date and time of day.