Related Manuals for Nolan NSRX3C25XX
Summary of Contents for Nolan NSRX3C25XX
-
Page 1: User Guide
Bluetooth Wireless Stereo Receiver(BTRX) P/N NSRX3C25XX USER GUIDE Declaration of Conformity. We declare that product NSRXRM3C2MSX conforms to the R&TTE Directive 1999/5/RC. FCC ID:TNZSRX3C2XXX 0678... -
Page 2: Getting Started
INTRODUCTION This Bluetooth Stereo receiver (Rx) offers latest innovation Bluetooth technology. It listen the music and talks on a Bluetooth mobile phone automatically when the phone call in. GETTING STARTED Unpack the package carefully and confirm that you have all of parts as shown below. Receiver USB charging cable 3.5mm stereo cable... -
Page 3: Product Overview
PRODUCT OVERVIEW See image below. Please note some models of Rx will differ slightly in style, colour and the functionality may vary according to their specifications. 3.5’ Audio Jack USB Charging Connector On/Off /Talk Button Clipper CHARGING Before using the Rx, you must charge it for approximately hours. - Page 4 Plug charging cable into microphone mini USB connector. Plug the other side of the USB charging cable into a powered USB connector. When charging, the amber LED will be lighted. When charging is completed, the amber LED will be turn off.
- Page 5 PARING To pair and connect with iPods, iPhones, iPads, tablets, android phones, Bluetooth MP3, music player, TV, laptop, Mac and PCs…etc Press and hold the ON/OFF button for about 3 seconds until blue amber light blinking alternately. After the Rx is in pairing state, initiate Bluetooth search feature and find the device name “BTRX”.Refer to your iPhones’, PCs’...
- Page 6 The iPhone, iPad, PC should find the Rx and pair with it. When both paired and connected, the Mode LED changes to flash slowly with blue colour. TURN ON Press and hold the ON/OFF button for about 3 seconds, until the blue LED flashes.
- Page 7 USING RECEIVER After connected, the Rx will receive and stream the audio/music from the Bluetooth audio/music device wirelessly. Playing Rx to Receive and Listen Stereo Music Fit earphone to Rx, Plug your earphone 3.5mm audio plug into the Rx’s 3.5 mm audio jack, you can listen the audio and music from earphone.
- Page 8 Making Calls make calls from your iPhone/rmobile phone or directly from Rx using voice dialing (if it’s supported by the phone) To make calls from your iPhone/mobile phone - Dial the call from your mobile phone and the call is automatically connected to your Rx.
-
Page 9: Ending Calls
Ending Calls When you have finished your call, press the talk button on your Receiver. The call will be disconnected. Adjusting the Rx Audio Volume To increase the audio volume While listening music, click the ON/OFF button once to increase the volume by one step. -
Page 10: Visual Indication
VISUAL INDICATION The LED can also indicate the status of microphone working statues. Statues Indication Charging amber LED is On blue LED Low speed flash, approx. every Not Connected 5 seconds Connected and blue LED middle play music / in call. speed flash amber blue... -
Page 11: Customer Service Information
Stereo receiver will Ensure the audio not pair with audio receiver’s PIN code is player or mobile 0000. CUSTOMER SERVICE INFORMATION For other Nolan Bluetooth products or support, please view website – www.nolan-sys.com or email info@nolan- sys.com or contact your local representative. - Page 12 DISCLAIMER Whilst every effort has been made to ensure that the information in this manual is accurate and complete, no liability will be accepted for any errors and/or omissions made. The manufacturer reserves the right to make changes and improvements to the specifications and features of the hardware and firmware of the products described in this document without prior notice.