Garland BULK 516 E Instruction Manual page 44

English
Before carrying out any maintenance work, make sure
that the machine is not switched to the mains.
Always use original spare parts so as to guarantee
the best possible performance of the machine and
so as to avoid dangers and risks to the user and the
machine. These spare parts should be bought at the
after sales service.
The use of non original spare parts can cause
accidents, personal damage to the user and breakage
of the machine.
8.3.1. MAINTENANCE OF THE BAR
Turn the bar regularly so that it does not only wear out
from one end. The guide of the bar must always be in
perfect conditions. Verify that it maintains the same
thickness in all the bar. Replace the bar if necessary.
Check that there no fissures and tha the level of
looseness is not big. If looseness is big or it has some
fissure, change the bar.
When you unmount the bar, remove any wood
splinters or shavings near the lubrication hole and on
the guide of the bar.
8.3.2. PINION DRAG
The pinion has a high level of wear. Check the pinion
periodically and if you detect wear or loss of material,
do not hesitate to take the machine to your after sales
service.
44/148