Resuming The Stored Speed - Mercedes-Benz Metris Operator's Manual

Driving systems
142
Storing and maintaining the current
speed
Accelerate the vehicle to the desired speed
X
above 20 mph (30 km/h).
Briefly push the cruise control lever up : or
X
down =.
Release the accelerator pedal.
X
Cruise control is activated. The current speed
is stored and shown briefly in the display's
text field.
The display also shows the V symbol and
the stored speed:
in the header on vehicles without steering
R
wheel buttons (
in the status area on vehicles with steering
R
wheel buttons (

Resuming the stored speed

G
WARNING
If you call up the stored speed and it differs
from the current speed, the vehicle acceler-
ates or decelerates. If you do not know the
stored speed, the vehicle could accelerate or
brake unexpectedly. There is a risk of an acci-
dent.
Pay attention to the road and traffic condi-
tions before calling up the stored speed. If you
do not know the stored speed, store the
desired speed again.
Briefly pull the cruise control lever towards
X
you ;.
Release the accelerator pedal.
X
Cruise control is activated and resumes the
vehicle's speed to the last speed stored.
The stored speed is shown briefly in the dis-
play.
The display also shows the V symbol and
the stored speed:
in the header on vehicles without steering
R
wheel buttons (
in the status area on vehicles with steering
R
wheel buttons (
i
When you pull the cruise control lever
towards you for the first time after starting the
engine, cruise control adopts the current
speed.
page 170)
Y
page 176)
Y
page 170)
Y
page 176)
Y
Setting the speed
It may be a moment before the vehicle starts to
accelerate or brake to the set speed. Take this
delay into account when setting the speed.
Press the cruise control lever up : to
X
increase the speed or down = to reduce the
speed.
The vehicle will accelerate or decelerate. The
speed is shown in the display.
Release the cruise control lever once the
X
desired speed is reached.
The displayed speed is stored.
or
Briefly press the cruise control lever as far as
X
the 1st pressure point up : or down =.
The last speed stored is increased/reduced in
increments of 1 mph (1 km/h).
or
Briefly press the cruise control lever beyond
X
the pressure point up : or down =.
The last speed stored is increased/reduced in
increments of 5 mph (10 km/h).
i
Cruise control is not deactivated if you
depress the accelerator pedal. If you acceler-
ate briefly to overtake, for example, cruise
control resumes the vehicle's speed to the
last speed stored after you have finished over-
taking.
To deactivate cruise control
There are various ways to deactivate cruise con-
trol:
Briefly press the cruise control lever for-
X
wards ?.
or
Apply the brakes.
X
The last speed set remains stored. The last
speed stored is deleted when you switch off the
engine.
Cruise control is deactivated automatically
when:
you apply the brakes
R
you apply the parking brake and the F
R
(only USA) or J (only Canada) indicator
lamp in the instrument cluster lights up
you are driving slower than 20 mph (30 km/h)
R
you shift the automatic transmission to neu-
R
tral position N while the vehicle is in motion