Catalogue Foreword ....................... 3 Product Features ....................4 Safety Precautions ....................5 EDC 1000 series ....................7 Operation and Function Description ..............7 Installation and Setting of the System ..............9 1. Basic installation instruction ..................9 2. Power On ........................10 3.
BXB ELECTRONICS CO., LTD. Foreword This EDC1000 series, the latest and easiest digital conference system with superb performance and elegant design, can be used for various conferencing. This conferencing system has the most updated built-in digital module with 10 chairmen microphones and 128 delegate microphone (can be increased according to practical requirement), providing the unique features of front sound mixing module, back amplified module, sound effect treatment amplified module to meet your requirement under any circumstance.
BXB ELECTRONICS CO., LTD. Product Features Main control unit of the conference system 1. Digital control capability: Chairman’s unit: 10 pcs, Delegate’s unit: 128pcs. 2. The setting of the ID of the conference unit: adopts 7-bit dip switch. 3. It has one LCD display and 3 setting buttons which can be used to set and change the working mode of the microphone.
BXB ELECTRONICS CO., LTD. Safety Precautions 1. Please read this manual carefully before installing and applying this unit. 2. Please keep this manual appropriately. 3. Please observe the instruction and warning in this manual. 4. Please do not use accessories not recommended by dealers. 5.
Page 6
BXB ELECTRONICS CO., LTD. 16. Please do not clean the conference main unit and its surrounding facilities with strong or power detergent If the surface of the unit is dirty, please do not clean it with liquid or spraying detergent, while slightly wet cloth should be used.
BXB ELECTRONICS CO., LTD. EDC 1000 series Operation and Function Description Introduction to the function of front panel of main unit Conference System Control EDC Serice 30 45 0 Open Mic Override Auto Off Mic 1 Mic 2 Mic 3...
BXB ELECTRONICS CO., LTD. Function of rear plate of main control unit SPEED DOME FUSE 250V 8A CONTROL UNIT RS-232 STAND BY LINK 3 LINK 2 LINK 1 L.SPEAKER AUX OUT VARIABLE Conference ~ AC FUSE 250V T8A CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO PREVENT ELECTRIC SHOCK...
BXB ELECTRONICS CO., LTD. Installation and Setting of the System 1. Basic installation instruction 1.1 Adjust AC power input ~ AC FUSE 250V T8A ~ AC FUSE 250V T8A CAUTION: CAUTION: . . . . ~ AC 110V/220V ~ AC 110V/220V 50/60HZ 50/60HZ AC 110V/60Hz...
BXB ELECTRONICS CO., LTD. 2. Power On 2.1 After making sure all the above adjustment and control wiring is completed and plug in the AC power supply to power on the system. The LED panel on Main control unit will show the previous conference setting.
BXB ELECTRONICS CO., LTD. 3. LED display and operation Conference System Control ○ 30 45 0 Open Mic Override Auto Off 3.1 Open Mic 3.1.1 1~9 speaking mode:Press “Oper Mic” button to select 1~9 delegates can speak at the same time.
BXB ELECTRONICS CO., LTD. 3.4 Saving setting 3.4.1 After setting the above information, save it in Main control unit for next time conference. Even after turn off or power cut will not need to reset again. 12/21 www.bxb.tw...
BXB ELECTRONICS CO., LTD. Table-top Delegate’s unit EDC 1012: ○ Talk button(with back-lighted indication lamp) ○ Build-in speaker ○ Microphone plug(DIN TYPE) 。 ○ Earphone output plug ○ Wire plug Function explanations: Press “Talk” button to start talking. The “Talk” button is with back-lighted indication lamp and Microphone with red LED to show its ON/OFF.
BXB ELECTRONICS CO., LTD. Flush-mounted Chairman’s unit EDC 1023: CONFERENCE SYSTEM CONTROL TALK ○ Chairman control button(with LED indication lamp) ○ Talk button(with LED indication ○ Earphone output plug with volume control ○ REC output plug ○ Microphone plug(XLR TYPE) 。 ○...
BXB ELECTRONICS CO., LTD. Flush-mounted Delegate’s unit EDC 1024: CONFERENCE SYSTEM CONTROL TALK ○ Talk button(with LED indication ○ Earphone output plug with volume control ○ REC output plug ○ Microphone plug(XLR TYPE) ○ Wire plug Function explanations: Press “Talk” button to start talking. The “Talk” button is with LED indication lamp and Microphone with red LED to show its ON/OFF.
BXB ELECTRONICS CO., LTD. EDC1050 Main control unit specifications: TECHNICAL DATA ◎ Frequency response:100HZ~16KHZ ◎ LINE IN:-4dB~+6dB≧10KΩ(balanced) ◎ LINE OUT:-4dB~+12dB≧200Ω(balanced) ◎ Sensitivity:-60dB ◎ Total Harmonic distortion:≦0.5% ◎ S/N:90dB ◎ Conference microphone connection:D type express port x 3 sets ◎ Mixer Mic input:4 sets 600Ω/6mV/-22dB Line input:4 sets 20KΩ/300mV/-10dB ◎...
Need help?
Do you have a question about the EDC 1000 and is the answer not in the manual?
Questions and answers