Browse Maps; Edit The Map View - Nokia 5320 XpressMusic User Manual

When you use Maps for the first time, you may need to define an internet access
point for downloading map information for your current location. To change the
default access point later, select Options > Settings > Network > Default access
point.
To receive a note when your device registers to a network outside your home
cellular network, select Options > Settings > Network > Roaming warning > On.
Contact your network service provider for details and roaming costs.
Almost all digital cartography is inaccurate and incomplete to some extent. Never rely solely
on the cartography that you download for use in this device.

Browse maps

Map coverage varies by country or region. This may be, for example, due to legal
restrictions.
When you open the Maps application, Maps zooms in to the location that was
saved from your last session. If no position was saved from the last session, the
Maps application zooms in to the capital city of the country you are in based on
the information the device receives from the cellular network. At the same time,
the map of the location is downloaded, if it has not been downloaded earlier.
To move on the map, scroll up, down, left, or right. A new map is automatically
downloaded if you scroll to an area which is not covered by maps already
downloaded. See "Download maps," p. 50. For more information on data
transmission charges, contact your service provider. The maps are automatically
saved in the device memory or on a compatible memory card (if inserted).
To establish a GPS connection and zoom in to your last known location, select
Options > Find place > GPS position [0], or press 0.
If the power saver turns on while the device is attempting to establish a GPS
connection, the attempt is interrupted.
A GPS indicator is shown on the display when you browse maps. When
the device receives enough data from the satellites to calculate the coordinates of
your current location, the circles turn green.
To view information about satellites when you are using Maps, select Options >
Map options > Satellite info.

Edit the map view

To zoom in or out, press * or #.
To switch between the 2D and 3D views, select Options > Map options > 2D/3D.
P o s i t i o n i n g 49