Use Your Headphones; Connect To Bluetooth - Philips SHB8850NC User Manual

4 Use your
headphones

Connect to Bluetooth

Connect the headphones to a
Bluetooth device
1
Turn on your mobile phone/Bluetooth
device.
2
Press and hold
on.
» The blue LED flashes.
» The headphones are reconnected
to the last connected mobile phone/
Bluetooth device automatically.
Tip
•
If you turn on the mobile phone/Bluetooth device or
activate the Bluetooth feature after turning on the
headphones, you have to reconnect the headphones
and mobile phone/Bluetooth device manually.
•
If your mobile phone/Bluetooth device cannot
reconnect automatically, try to reconnect manually
by clicking the headphones' name again under the
Bluetooth setting manual on your mobile phone/
Bluetooth device.
Note
•
If the headphones fail to connect to any Bluetooth
device within range in 5 minutes, it will switch off
automatically to save the battery life.
Manage your calls and music
On/off
Task Button
Turn the
headphones
on.
to turn the headphones
Operation
Press and hold for 4
seconds.
Turn the
headphones
off.
Music control
Task Button
Play or
pause
music.
Adjust Volume/track
volume. control
+/-
Skip Volume/track
forward. control
Skip Volume/track
backward. control
Call control
Task
Pick up/hang up
a call.
Reject an
incoming call.
Switch caller
during a call.
Mute/unmute the
microphone in
a call.
Voice control
Task
Siri/Google Now.
Press and hold for 4
seconds.
» The white
LED is on and
fades out.
Operation
Press once.
Press once
or press and
hold.
Press once.
Press twice.
Button Operation
Press once.
» 1 beep.
Press and hold
for 2 seconds.
» 1 beep.
Volume/ Press once.
track » 1 beep.
control
Press once.
/
» 1 beep.
Button Operation
Press once.
EN
7