Asus INTEL CUW(E)-FX User Manual page 20

3. HARDWARE SETUP
5) Onboard LAN Setting (LAN_EN)
The onboard LAN may be enabled/disabled with this jumper.
Setting
Enable
Disable
CUW(E)-FX
CUW(E)-FX LAN Setting
6) Onboard LAN Power Setting (LANPWR)
The onboard LAN power may be set to +3 Volt or +3 VSB. Select +3 Volt if you
do not have a power supply with 720mA standby power. Selecting +3 VSB will
allow the use of Wake-on-LAN but may not allow system wakeup if the power
supply's standby power is insufficient.
Setting
+3 Volt
+3 VSB
CUW(E)-FX
CUW(E)-FX LAN Power Setting
20
LAN_EN
[1-2] (default)
[2-3]
LANPWR
[2-3] (default)
[1-2]
ASUS CUW(E)-FX User's Manual
LAN_EN
1 2 3 1 2 3
Enable Disable
(Default)
LANPWR
1 2 3 1 2 3
+3 VSB +3 Volt
(Default)