Voice Recognition Commands - Cadillac 2006 DTS Manual

•
If you experience difficulty with the system
recognizing a command, try saying it more softly,
and wait for a few seconds after the beep, or
you may just try saying it again.
•
Background noise may cause voice commands to be
misunderstood, including airflow noise from wind.
•
To use the voice recognition system, the map DVD
must be loaded.
This system is able to recognize commands in
three different languages. The system will only recognize
commands based on the language selected from the
Driver Information Center (DIC). See "Driver Information
Center, DIC Vehicle Personalization" in the Index of
your vehicles owner manual.

Voice Recognition Commands

The following list shows all of the voice commands
available for the navigation system with a brief
description of each. The commands are listed with the
optional words in brackets. To use the voice commands,
refer to the instructions listed previously.
Voicetag Commands
The following are voicetag commands you can access
by clearly stating the commands exactly as they are
written. You may have up to 40 voicetag entries
for destinations.
Navigation go to [destination] (voicetag), navigation
select [destination] (voicetag): These commands
instruct the system to select a destination saved under
the voicetag you have stored.
If you are not currently driving on a route, the system
will automatically create the voice tag destination as the
final destination. If you are currently driving on a
route, the system will automatically create the voice tag
destination as a waypoint. Up to three waypoints can
be created.
Storing Voicetags
From the address book entry information page, press
the Add Voice tag screen button. The system will
respond "Name Please?".
4-3