Self Adhesive Labels - MICO Lock System 691 Operation And Installation Instructions Manual

SELF ADHESIVE LABELS

All 691 models include the self adhesive labels shown below. Determine which labels are used in your application.
THIS NOTICE MUST BE AFFIXED ON DASH IN VIEW OF OPERATOR
!
WARNING
Serious injury
or death can
occur if these
instructions are
PREVENT
not followed
ROLLAWAY
This vehicle is equipped with 691 Brake Lock System.
Operator must read and understand warnings and
operating instructions before using vehicle (Form no.
81-690-032) .
Do not use 691 Brake Lock in place of original equip-
ment parking brake.
Always apply parking brake and other provided hold-
ing devices when using 691 System.
Do not use 691 Brake Lock for overnight or prolonged
parking.
Release 691 Brake Lock before moving vehicle.
691 Brake Lock and warning circuit are disabled if
battery power is lost or disconnected.
Use in all applications.
NOTE
THIS NOTICE MUST BE AFFIXED ON DASH IN VIEW OF OPERATOR
!
WARNING
Serious injury or death can occur if
these instructions are not followed.
Operator must read and understand warnings
and operating instructions before using vehicle
(Form no. 81-690-032).
This vehicle is equipped with a 691 Brake Lock
System that is activated by a remote input.
Unintended operation of the remote input will
cause the brakes to apply or release without
warning.
The operator must understand the function of
the remote inputs.
Be aware of all conditions that will cause the
691 Brake Lock System to activate or deacti-
vate without user intervention.
Use in all applications where the
691 System is remotely activated.
1
THIS NOTICE MUST BE AFFIXED ON DASH IN VIEW OF OPERATOR
Operator must read and
understand Warnings and
Operating Instructions before
using vehicle
(Form no. 81-690-032).
691 Brake Lock
TO LOCK:
1. Set parking brake
2. Move lock switch to LOCK position
TO RELEASE:
1. Move lock switch to RELEASE position
2. Release parking brake
Use in all applications
using a user interface.