Table of Contents
Advertisement
ELECTROSTATIC DISCHARGE PRECAUTIONS
Electrostatic discharge (ESD) can cause damage to any
product, add-in
electronic
components.
precautions when installing or handling these kinds of products
1. Do not remove unit from its protective packaging until
ready to install.
2. Wear an ESD wrist grounding strap before handling any
module or component.
maintain grounded contact with the system unit throughout
any procedure requiring ESD protection.
3. Hold the units by the edges; do not touch the electronic
components or gold connectors.
4. After removal, always place the boards on a grounded,
static-free surface, ESD pad or in a proper ESD bag. Do not
slide the modules or standalone units over any surface.
WARNING!
components
electrostatic discharge damage.
these components directly unless you are a qualified
service technician and use tools and techniques that
conform to accepted industry practices.
modules or standalone units, containing
Always
If the wrist strap is not available,
Integrated circuits and fiber optic
are
13
observe
extremely
the
following
susceptible
Do not handle
to
Advertisement
Table of Contents
