Download
Share
Print this page
Lotus H370 Petite Assembly And Use Instructions
  1. Manuals
  2. Brands
  3. Lotus Manuals
  4. Indoor Fireplace
  5. H370 Petite
  6. Assembly and use instructions

Lotus H370 Petite Assembly And Use Instructions

Hide thumbs

Advertisement

Quick Links

Download this manual
Assembly and User Instructions
Fireplace Insert, Lotus H370 Petite
Version 1, 11-10-2012

Advertisement

loading
Need help?

Need help?

Do you have a question about the H370 Petite and is the answer not in the manual?

Questions and answers

Related Manuals for Lotus H370 Petite

Summary of Contents for Lotus H370 Petite

  • Page 1 Assembly and User Instructions Fireplace Insert, Lotus H370 Petite Version 1, 11-10-2012...
  • Page 3 – now, as well as in the years to come. This is why this guide would be worth while keeping, like all other directions for use. Lotus may look back on a long tradition, making our first productions back in 1979. Our production is now run at Langeskov, and exported to many European markets.
  • Page 4 Pic.2 A: Holes used for fastening the insert to the base. B: Set screws for adjustment of the insert in relation to the base. C: Set screws for adjustment of the combustion champer in relation to the cabinet. Pic.2 A: upper smoke turnplate-B: lower smoke turnplate-C: Skamol must be removed to gain access to the adjusting/fastening screws.
  • Page 5 Insulating material: Useable are all AGI Q 132 reistered insulating material. All measurements are intended as minimum distances. Distance to inflammable material When the fireplace insert is mounted in an existing brick fireplace, the requirements for distance to inflammable material and fireproofing on the floor will usually be in order.
  • Page 6 Distance to non-inflammable material For non-inflammable material, no requirements apply. The Chimney A good chimney draught is essential for how well a fireplace insert will burn. Note that there should be access to cleaning doors. The working height of the chimney should typically range between 3.5 and 4.5 metres.

  • Page 7: Chimney Sweeper

    through the door. Similarly, it is put in place by moving it up askew at one side and then at the other side, and it is then put in place in the middle. The upper smoke turn plate (A) is removed by pulling it forward and then lifting it off the bracket in the back of the combustion champer, it is mounted in reverse.
  • Page 8 Once the fire has burned down to the state of glowing (no more flames seen), open the door carefully so that the ashes will not be stirred up and come out. Cautiously spread the glows using a poker so as to make these lie in an even layer. Put 2 pieces of wood into the fireplace insert, a total of about 1.5kg.

  • Page 9: Sound Advice

    Cleaning of Fireplace Insert All Lotus fireplace inserts have been factory surface treated using original Senotherm lacquer in colours ”coke” or ”grey”. This treatment will make the fireplace insert exude a special smell during the initial kindlings but this will vanish after a few times.
  • Page 10 Firewood for your Lotus fireplace insert should have a diameter of 7-9cm. The essence of good combustion is that the wood should be appropriately dry (at a humidity of 13-18%).
  • Page 11 - Any unauthorized change of the insert will render the warranty nil and void Operating Trouble If you have any problems with your Lotus fireplace insert, you may find the cause below. If not, you will always be welcome to contact your Lotus distributor.
  • Page 12 Fireplace Insert H370 Petite...
  • Page 14 Lotus Heating Systems A/S. This warranty does not cover damage caused by inappropriate, non-expert/incompetent use of the stove. If a product is returned to Lotus Heating Systems A/S, and the damage subsequently turns out not to be covered by this warranty, any costs incurred shall be incumbent on the customer.