Technical Details - IRUS unitrak Manual

Technical details:

Measurements:
Transmission:
PTO shaft:
Steering:
Steering bar:
Battery:
Tyre Pressures:
Oil filling quantities:
Weight without wheels:
Speeds:
Slope suitability:
Attention!!
When working on a slope, the oil level in the engine must be at the uppermost fill mark (max)!
The machine must be equipped with the appropriate auxiliary equipment such as additional
stabilizing wheels, steel cage wheels, etc.!
Length: 1600 mm, without attachments
Width: 1150 mm (For terra tyres 23x10.50-12) Height: 1000 mm, depending
on the position of the steering bar
Hydrostatic
Engine PTO shaft: 970 rpm (at engine speed 3300 rpm)
Active steering
Infinitely variable in the absence of tools, adjustable to the left and right,
Mounted within anti-vibration elements.
12 V, 18 Ah
0.8-1.8 bar for AS tyres 6-12
0.5-1.5 bar terra tyres 23x10.50-12
Engine: See Engine Operating Manual
Speed reduction gears: 0.6 litres of gear oil SAE 80W-90
Hydraulics: about 2.5 litres of biodegradable hydraulic oil PANOLIN HLP
SYNTH 68
182 kg (basic machine 13 hp) / 190 kg (basic machine 18 hp)
Forwards 0-8 km/h, Backwards 0-6 km/h
infinitely variable
45 ° = 100%