Connection Of Your Adsl/Home Broadband And Landline Service - ORANGE Livebox Installation Manual

connection of your ADSL/home broadband and landline service

please do not start the installation of the router until you have received confirmation
via text message from Orange that your ADSL/home broadband service is activated
Before starting installation, take off all plastic coverings protecting the router
as well as the label that covers the power source connection.
1
Connect the power source (it is important that you connect the one that
comes inside the pack, not an external one). Connect it to the router and a
power plug close to it. Press the ON button (inwards) to turn the router on.
2
Connect one side of the ADSL cable (with the grey connectors) to the router
connection (part marked in grey on router) and the other side to the phone jack.
3 Connect one side of the Ethernet network cable (with the red connectors) to the
Ethernet connection of your PC, and the other side to the connection of your router
(part marked in red on router).
4
Now, make sure the phone indicator light has turned green (this can take up
to 5 minutes to turn on):
if it is turned on, connect your landline phone to
the blue or violet connection of your router and
you can start enjoying your line with Orange
if it is not turned on, wait till activation takes
place (this process can take up to a week, we
will inform you once it has via text message). This
will occur if your service requires the installation
of a new NTU (Network Termination Unit) and
the portability or transfer of your previous phone
number to Orange
to connect via Wi-Fi, see next page
the power light will
turn green
the home broadband/
ADSL light will flash red
the Wi-Fi light will
flash green
wait till the ADSL light
stops flashing and stays
green permanently (this
can take up to 5 min.)
3