Table of Contents
Advertisement
6. Driver Setup
The T2 3-in-1 Upgrade card is a Plug-n-Play device which can be auto-detected by Windows
2000/ME/XP. After the card is inserted into a PCI slot, turn on your computer. A Found New
Hardware Wizard window appears on the screen during startup. Follow the screen instructions
to setup the card driver. If your computer failed to detect the card, click Start > Control Panel >
Add New Hardware. Follow the instructions to setup the card driver manually.
NOTE:
For details on device driver installation, refer to "Chapter 3: Starting Up" of the Terminator 2 User
Guide.
7. Troubleshooting
Q: What should I do if:
•
Windows can not detect the card during startup, or
•
After the driver is loaded, an exclamation mark appears before PCI FireWire (IEEE 1394)
in the Device Manager?
A: Make sure that the card is firmly seated on the PCI slot.
ASUS T2 3-in-1 Upgrade User's Guide
®
98/
11
Advertisement
Table of Contents
