Operation; General Operation; Harness - Qualcast YT623105X) Instruction Manual

OPERATION

General operation

1. Check the product, its power cord and plug as well as accessories for damage before
each use. Do not use the product if it is damaged or shows wear.
2. Double check that accessories are properly fixed.
3. Always hold the product on its handles. Keep the handles dry and clean to ensure safe
support.
4. Ensure that the air vents are always unobstructed and clear.
Clean them if necessary with a soft brush. Blocked air vents may lead to overheating and
damage the product.
5. Switch the product off immediately if you are disturbed while working by other people
entering the working area. Always let the product come to complete stop before putting it
down.
6. Do not overwork yourself. Take regular breaks to ensure you can concentrate on the work
and have full control over the product.
7. Before operation, loosen leaves that are stuck to the ground using a broom or rake.
8. Before switching the product on, check whether it has been assembled correctly and all
the moving parts are running smoothly!
9. While working, ensure that the product does not strike hard objects, as this can cause
damage.
10. Do not blow any solid bodies such as stones, branches or pieces of branch, fir cones or
similar.
11. We recommend slightly dampening surfaces in dusty conditions or using a mister
attachment.

Harness

The harness (3) helps the operator carry the product.
1. Place the harness (3) so that is runs over the left shoulder, crossing the breast and the back
(Fig. 6, 6a).
Fig. 6 Fig. 6a
14