Sony Walkman NW-HD1 Service Manual
Sony Walkman NW-HD1 Service Manual

Sony Walkman NW-HD1 Service Manual

Portable hard disk audio player
Hide thumbs Also See for Walkman NW-HD1:

Advertisement

SERVICE MANUAL
Ver 1.1 2004.09
• SonicStage and SonicStage logo are trademarks or registered
trademarks of Sony Corporation.
• OpenMG, ATRAC3, ATRAC3plus and their logos are trademarks
of Sony Corporation.
• Microsoft, Windows, Windows NT and Windows Media are
trademarks or registered trademarks of Microsoft Corporation in
the United States and/or other countries.
• IBM and PC/AT are registered trademarks of International Business
Machines Corporation.
• Macintosh is a trademark of Apple Computer, Inc. in the United
States and/or other countries.
• Pentium is a trademark or a registered trademark of Intel
Corporation.
• Adobe and Adobe Reader are trademarks or registered trademarks
of Adobe Systems Incorporated in the United States and/or other
countries.
• US and foreign patents licensed from Dolby Laboratories.
• All other trademarks and registered trademarks are trademarks or
registered trademarks of their respective holders.
• In this manual,
TM
®
and
marks are not specifi ed.
Sony Corporation
9-879-079-02
Personal Audio Company
2004I05-1
Published by Sony Engineering Corporation
© 2004.09
NW-HD1
Maximum recordable number of track
(Approx.)*
ATRAC3
ATRAC3plus
5,000 (132 kbps)
2,500 (256 kbps)
6,000 (105 kbps)
10,000 (64 kbps)
10,000 (66 kbps)
13,000 (48 kbps)
* When transferring four-minute tracks
Sampling frequency
44.1 kHz
Audio compression technology
Adaptive Transform Acoustic Coding3 (ATRAC3),
Adaptive Transform Acoustic Coding3plus
(ATRAC3plus)
Frequency response
20 to 20,000 Hz
(single signal measurement during playback)
Output
i
(headphones)/LINE OUT* :
Stereo minijack/194 mV
* The jack is used for both headphones and LINE
OUT.
Operating temperature
5 to 35ºC (41 to 95ºF)
Power source
DC IN 6 V (from built-in rechargeable battery)
Battery life (continuous playback)
ATRAC3plus format (48 kbps): Approx. 30 hours
PORTABLE HARD DISK AUDIO PLAYER
US Model
Canadian Model
AEP Model
UK Model

SPECIFICATIONS

Dimension
Not including projecting parts:
89.0 × 62.1 × 13.8 (the thinnest part 12.6) mm
(3 5/8 × 2 1/2 × 9/16 (the thinnest part 1/2)
inches) (w/h/d)
Including projecting parts:
89.2 × 63.4 × 14.3 mm
(3 5/8 × 2 1/2 × 19/32 inches) (w/h/d)
Mass
Approx. 110 g (3.9 oz)
US and foreign patents licensed from Dolby
Laboratories.
Supplied accessories
• Headphones (1)
• USB cradle (1)
• Dedicated USB cable (1)
• AC power adaptor (1)
(For the supplied USB cradle)
• Carrying pouch (1)
• CD-ROM (1) *
(SonicStage, PDF of Operating Instructions)
• Quick Start Guide (1)
* Do not play this CD-ROM on an audio CD player.
Design and speci cations are subject to change
without notice.

Advertisement

Table of Contents
loading

Summary of Contents for Sony Walkman NW-HD1

  • Page 1: Specifications

    Power source DC IN 6 V (from built-in rechargeable battery) Battery life (continuous playback) ATRAC3plus format (48 kbps): Approx. 30 hours PORTABLE HARD DISK AUDIO PLAYER Sony Corporation 9-879-079-02 Personal Audio Company 2004I05-1 Published by Sony Engineering Corporation © 2004.09...
  • Page 2: Table Of Contents

    THE PARTS LIST ARE CRITICAL TO SAFE OPERATION. FONCTIONNEMENT. NE REMPLACER CES COM- POSANTS REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE QUE PAR DES PIÈCES SONY DONT LES NUMÉROS SONT PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR DONNÉS DANS CE MANUEL OU DANS LES SUPPLÉMENTS IN SUPPLEMENTS PUBLISHED BY SONY.
  • Page 3: Servicing Notes

    NW-HD1 SECTION 1 SERVICING NOTES UNLEADED SOLDER System requirements Boards requiring use of unleaded solder are printed with the lead- Computer IBM PC/AT or Compatible • CPU: Pentium II 400 MHz or higher (Pentium III 450 MHz or higher is free mark (LF) indicating the solder contains no lead.
  • Page 4: General

    NW-HD1 SECTION 2 This section is extracted from instruction manual. GENERAL Player display Guide to Parts and Controls Player 2 3 4 5 6 7 qf qg qh qj Track number indicator Character information display Bookmark indicator Playback progress bar Playback indicator Playing time Repeat indicator...
  • Page 5: Disassembly

    NW-HD1 SECTION 3 DISASSEMBLY • This set can be disassembled in the order shown below. 3-1. DISASSEMBLY FLOW 3-2. CABINET (UPPER) SUB ASSY (Page 5) 3-3. CABINET (LOWER) ASSY (Page 6) 3-4. BATTERY BLOCK SUB ASSY (Page 6) 3-5. MAIN BOARD (Page 7) 3-6.
  • Page 6: Cabinet (Lower) Assy

    NW-HD1 3-3. CABINET (LOWER) ASSY S9501 S5009 knob (hold) knob (batt) 1 Remove the cabinet (lower) assy in the direction of arrow. Note : When install the cabinet (lower) assy, adjust the position of two switches (S5009, S9501) and knob (batt, hold). 3-4.
  • Page 7: Main Board

    NW-HD1 3-5. MAIN BOARD 7 MAIN board 6 three toothed screws (M1.4) 4 flexible board (CN100) 3 sheet (insulating HDD flexible) 5 flexible board (CN5003) 2 sheet (SHIELD HDD) 1 sheet (damper) 3-6. LCD BLOCK SUB ASSY 4 LCD block sub assy 3 claw 2 claw 5 flexible board...
  • Page 8: Hdd Unit, Hdd Board

    NW-HD1 3-7. HDD UNIT, HDD BOARD 1 Remove the HDD unit in the direction of arrow. 2 HDD board Note : Extraction and insertion of a HDD board is performed perpendicularly.
  • Page 9: Test Mode

    NW-HD1 Ver 1.1 SECTION 4 TEST MODE 1. OUTLINE 5. OPERATION OF THE TEST MODE For the LCD display, the LCD on the main unit is shown, but the 5-1. Power contents of LCD display on the remote commander are same. 5-1-1.
  • Page 10 NW-HD1 Ver 1.1 key to display minor item, and press the M m 5. Press the key, “READ” is displayed and hard disk drive 4. Press the becomes read state. key to select the “TESTLD”. After 10 seconds, “FIN” is displayed automatically and read LCD display state is completed.
  • Page 11 NW-HD1 Ver 1.1 5-2-3. Frequency characteristic check 5-2-4. Channel separation check “20 Hz/20 kHz/100 Hz/10 kHz 0 dBs L-ch/R-ch” audio signal is “1 kHz 0 dBs L-ch/1 kHz 0 dBs R-ch” audio signal is outputted. outputted. Checking method: Checking method: 1.
  • Page 12 NW-HD1 Ver 1.1 5-2-6. SOUND EQ check LCD display “100 Hz/250 Hz/630 Hz/1.6 kHz/4 kHz/10 kHz –20 dBs L-ch/R- EQ 5 ch” audio signal is outputted. Checking method: 16. Press the key, “START” is displayed and “4 kHz –20 dBs L- 1.
  • Page 13 NW-HD1 Ver 1.1 key to display minor item, and press the M m 3. Press the 4. Press the key, “START” is displayed and “1 kHz 0 dBs key to select the “CLOCK”. L-ch/R-ch” audio signal is outputted. LCD display LCD display CLOCK START...
  • Page 14 NW-HD1 Ver 1.1 5-3-4. LCD display check 5. “–X” is displayed. Main unit is fixed so that 2 of fig.1 may become downward and press the key. LCD display is checked. Checking method: LCD display 1. Enter the test mode. key to display major item, and press the M m 2.
  • Page 15 NW-HD1 Ver 1.1 5-3-6. G-sensor adjustment check Press the [SET UP] key when canceling. 5. Press the [SET UP] key, return to minor item selection screen. 3. Press the key to display minor item, and press the M m key to select the “SC RD1” this mode checks that G-sensor adjustment is performed or not 5-3-10.
  • Page 16: Diagrams

    NW-HD1 SECTION 5 DIAGRAMS 5-1. BLOCK DIAGRAM – MAIN Section (1/2) – B+ SWITCH Q2001 VDC (MOTOR) HARD DISK VDC (LOGIC) +3.3V_HDD DRIVE UNIT • SIGNAL PATH : AUDIO IC1003 – IC7001 (Page 17) 72 73 74 77 78 83 84 85 81 148 146 143 142 144 145 147 141 140 47 48 49 50 51 52 53 54 57 58 59...
  • Page 17: Block Diagram -Main Section (2/2)

    NW-HD1 5-2. BLOCK DIAGRAM – MAIN Section (2/2) – IC1003 – IC7001 (Page 16) • SIGNAL PATH : AUDIO 186 191 192 193 182 185 183 184 181 88 89 83 HEADPHONE AMP IC4301 D0 – 15 D0 – 15 (Page 16) DATA BUS AOUTL 134...
  • Page 18: Block Diagram -Key/Power Supply Section

    NW-HD1 5-3. BLOCK DIAGRAM – KEY/POWER SUPPLY Section – +2.4V_AD (IC1003) +2.4V +2.4V_DAC REGULATOR (IC1003) IC4302 +3.3V (IC4301) +3.3V_HD DC/DC CONVERTER IC9001 +3.3V_A PVIN +3.3V VOUT BUFFER XSHDN/SS Q9002, 9004 MD/SYNC S5009 HOLD PF1/T1 82 SWITCHING +2.8V REGULATOR IC9003 +3.3V B+ SWITCH G-SENSOR POWER...
  • Page 19 NW-HD1 Ver 1.1 • Note for Printed Wiring Boards and Schematic Diagrams • Waveform Note on Printed Wiring Board: Note on Schematic Diagram: – MAIN Board – • X : parts extracted from the component side. • All capacitors are in µF unless otherwise noted. (p: pF) •...
  • Page 20: Printed Wiring Board - Main Section (Component Side)

    NW-HD1 5-4. PRINTED WIRING BOARD – MAIN Section (Component Side) – :Uses unleaded solder. • Semiconductor Location Ref. No. Location MAIN BOARD (COMPONENT SIDE) J4301 D4101 FB1011 SWITCH UNIT /LINE OUT D4201 IC1002 SET UP D4301 D4445 R1022 MODE , D4302 C1001 C4320 +...
  • Page 21: Printed Wiring Board - Main Section (Conductor Side)

    NW-HD1 5-5. PRINTED WIRING BOARD – MAIN Section (Conductor Side) – :Uses unleaded solder. • Semiconductor Location Ref. No. Location MAIN BOARD (CONDUCTOR SIDE) D4303 D4304 B-10 TP4312 Q1001 Q9002 H-11 Q9004 G-11 TP4314 Q9501 TP4308 Q9503 C1019 D4303 C4313 D4304 C4315 R5008...
  • Page 22: Schematic Diagram -Main Section (1/7)

    NW-HD1 • See page 34 for IC Pin Function Description. 5-6. SCHEMATIC DIAGRAM – MAIN Section (1/7) – (1/7) R7009 470k R7010 470k HDD_CNT USB_CNT RMC_DTCK BACKLIGHT_PWR (Page 24) XRESET_LCD XGSEN XGSEN_PWR_CTL XUSLEEP XUSLEEP XURESET R7003 R7004 R7008 XURESET (Page 26) USB_CNT D33_MODE R7001...
  • Page 23: Schematic Diagram -Main Section (2/7)

    NW-HD1 • See page 30 for IC Block Diagram. 5-7. SCHEMATIC DIAGRAM – MAIN Section (2/7) – (2/7) GANDHI_CNT GAND_D GA17 R1102 FLASH MEMORY ∗ IC1101 MBM29SL800BE -90PT CSP(Chip Size Package) (NOT SUPPLIED) GA16 GA15 XBYTE GA14 GA13 GD15 DQ15 GA12 GA11 GD14...
  • Page 24: Schematic Diagram -Main Section (3/7)

    NW-HD1 Ver 1.1 • See page 30 for IC Block Diagrams. 5-8. SCHEMATIC DIAGRAM – MAIN Section (3/7) – (3/7) R5018 TP5003 470k HOLD_KEY BACKLIGHT_PWR S5009 HOLD RMC_DTCK XRESET_LCD USB_CNT (Page 22) CN5001 C5017 D5001 DB15 TP5002 0.01 MA2S728-TX DB14 DB13 R5012 DB12...
  • Page 25: Schematic Diagram -Main Section (4/7)

    NW-HD1 • See page 19 for Waveform. • See page 34 for IC Pin Function Description. 5-9. SCHEMATIC DIAGRAM – MAIN Section (4/7) – (4/7) FS256 GAND_D GAND_A GANDHI_CNT XINTREQH C1010 XINTREQH XINTREQG XINTREQG XINTREQU R1021 R1007 R1026 XINTREQU 470k 100k XOUT C1007...
  • Page 26: Schematic Diagram -Main Section (5/7)

    NW-HD1 • See page 30 for IC Block Diagram. • See page 34 for IC Pin Function Description. 5-10. SCHEMATIC DIAGRAM – MAIN Section (5/7) – (5/7) C8006 C8007 C8005 0.01 6.3V G-SENSOR B+ SWITCH IC8001 IC8000 SN74LVC1G66DCKR HAAM-301BS DZOUT CSET DYOUT R8008...
  • Page 27: Schematic Diagram -Main Section (6/7)

    NW-HD1 • See page 30 for IC Block Diagrams. • See page 19 for Waveform. 5-11. SCHEMATIC DIAGRAM – MAIN Section (6/7) – (6/7) CN9501 TP9502 LITHIUM ION BATTERY BATT+ LIS1317HNP BATT- 4.2V 760mAh TP9513 2.4V 1.8V S9501 2.0V BUILT-IN BATTERY (Page 28) AUTO SELECT R9504...
  • Page 28: Schematic Diagram -Main Section (7/7)

    NW-HD1 • See page 30 for IC Block Diagrams. • See page 19 for Waveform. 5-12. SCHEMATIC DIAGRAM – MAIN Section (7/7) – (7/7) 1.2V 1.2V 1.8V 1.8V 3.3V 3.3V XCHG_PG (Page 22) C9007 C9012 C9006 C9009 C9013 6.3V 6.3V VSTBY TP9001 2.4V...
  • Page 29: Printed Wiring Board - Hdd Section

    NW-HD1 5-13. PRINTED WIRING BOARD – HDD Section – :Uses unleaded solder. 5-14. SCHEMATIC DIAGRAM – HDD Section – HARD DISK DRIVE UNIT HDD BOARD (COMPONENT SIDE) CN100 CN101 RESERVED RESERVED GND(LOGIC) GND(LOGIC) CN101 VDC(MOTOR) VDC(MOTOR) VDC(LOGIC) VDC(LOGIC) GND(MOTOR) GND(MOTOR) 1-862-778- (11) XDASP...
  • Page 30 NW-HD1 • IC Block Diagrams – MAIN Board – IC5001 SM8142BD-G-EL IC3001 CXR710160-211GH IC4301 AN17020A-VB 64 63 62 61 60 59 58 57 56 55 52 51 50 49 PE3/RxD1 HIGH VOLTAGE PE2/TxD1 BEEP SWITCHING CIRCUIT PE1/RxD0 MUTING PE0/TxD0 DIVIDING DIVIDING HEADPHONE AMP CIRCUIT...
  • Page 31 NW-HD1 IC9001 LTC3441EDE#TR SHUTDOWN SHDN/SS SUPPLY CURRENT 1.22V LIMIT COMPARATORS EEEOR LOGIC 2.4V OUTPUT INTERNAL PHASING UVLO AVERAGE CURRENT THERMAL PGND LIMIT SHUTDOWN 3.2A REVERSE CURRENT LIMIT –0.8A PVIN 8 VOUT GATE DRIVERS ANTICTOSS CONDUCTION 1MHz PGND SYNC BURST MODE SLEEP OPERATION CONTROL...
  • Page 32 NW-HD1 IC9002 SC901584EPR2 36 35 RESET 2 SERIAL RST2 PASS POWER STEP REGULATOR 3 SWITCH 2 UP-DOWN REGC2 DRIVER RST2 MUTING REG2G REF2 SERIAL VREF BUFFER REGO2 PASS REGULATOR 2 REGI2 32 DTC2 REGC1 VREF RST1 SERIAL REF2 REGO1 PASS 31 RF2 REGULATOR 1 REGI1...
  • Page 33 NW-HD1 IC9501 BQ24010ADRCR IN 1 VI (BAT) VO (REG) V (ISET) VI (BAT) VSET STAT1 3 VI (BAT) STAT2 4 DEGLITCH V (SLP) CHARGE VO (REG) CONTROL, TIMER, VI (BAT) DEGLITCH VSS 5 DISPLY THERMAL LOGIC VI (BAT) SHUTDOWN VI (SET) DEGLITCH VI (SET) DEGLITCH...
  • Page 34 NW-HD1 • IC Pin Function Description MAIN BOARD IC1003 CXR704060-201GA (SYSTEM CONTROLLER, D/A CONVERTER) Pin No. Pin Name Description VDIO0 — Power supply terminal (+1.8V) (for I/O interface) PM4/A12 to PM7/A15, 2 to 10 Address signal output to the flash memory and multi interface PN0/A16 to PN4/A20 PN5/A21 to...
  • Page 35 NW-HD1 Pin No. Pin Name Description PE3/RXD1 Data input terminal Not used PE4/SCK1 Serial clock signal output to the power control and real time clock PE5/SO1 Serial data output to the power control and real time clock PE6/SI1 Serial data input from the real time clock PE7/SCS1 Chip enable signal output to the real time clock XOUT/CKO...
  • Page 36 NW-HD1 Pin No. Pin Name Description PD2/DPLS Test terminal for debug Not used PD3/DMNS Test terminal for debug Not used PD4/TXDPLS Test terminal for debug Not used PD5/TXDMNS Test terminal for debug Not used PD6/TXENL Test terminal for debug Not used PD7/SUSPEND Test terminal for debug Not used VBUS...
  • Page 37 NW-HD1 Pin No. Pin Name Description MSINS Card detection signal input from the memory stick interface Not used HOLD key detection signal input terminal “L”: hold P10/DADT Audio data input from the memory stick interface Not used P11/ADDT Audio data input from the sub system controller P12/LRCK L/R sampling clock signal input from the sub system controller P13/BCK...
  • Page 38 NW-HD1 MAIN BOARD IC2001 1S1R72003BOOA100 (USB CONTROLLER) Pin No. Pin Name Description Internal operation setting terminal N.C. — Not used AVSS — Ground terminal (analog system) AVDD — Power supply terminal (+3.3V) (analog system) AVSS — Ground terminal (analog system) AVDD —...
  • Page 39 NW-HD1 Pin No. Pin Name Description HIORDY Wait signal input from the hard disk drive unit — Ground terminal (logic system) — Power supply terminal (+3.3V) (logic system) XHDMACK DMA acknowledge signal output to the hard disk drive unit HINTRQ Interrupt request signal input from the hard disk drive unit Address signal output to the multi interface and hard disk drive unit XHPDIAG...
  • Page 40 NW-HD1 MAIN BOARD IC7001 CXD1616GH (MULTI INTERFACE) Pin No. Pin Name Description XTAL Sub system clock input terminal Not used EXTAL Sub system clock output terminal Not used CLK2550A Clock signal (22.5792 MHz) output to the sub system controller CLK2550X Clock signal (22.5792 MHz) inversion output to the sub system controller XOSCSTP Oscillation stop signal input terminal Not used...
  • Page 41 NW-HD1 Pin No. Pin Name Description HIORDY Wait signal input from the hard disk drive unit XHDMACK DMA acknowledge signal output to the hard disk drive unit HDMARQ DMA request signal input from the hard disk drive unit HINTREQ Interrupt request signal input from the hard disk drive unit XHRESET Reset signal output to the hard disk drive unit LRCK...
  • Page 42: Exploded View

    NW-HD1 Ver 1.1 SECTION 6 EXPLODED VIEW NOTE: • -XX and -X mean standardized parts, so they • Items marked “*” are not stocked since they may have some difference from the original are seldom required for routine service. Some one.
  • Page 43: Electrical Parts List

    NW-HD1 Ver 1.1 SECTION 7 ELECTRICAL PARTS LIST MAIN NOTE: • Due to standardization, replacements in the • Items marked “*” are not stocked since they The components identified by mark 0 or dotted line with mark 0 are parts list may be different from the parts are seldom required for routine service.
  • Page 44 NW-HD1 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C3011 1-100-504-11 CERAMIC CHIP 0.1uF 6.3V C7006 1-100-504-11 CERAMIC CHIP 0.1uF 6.3V C3012 1-100-504-11 CERAMIC CHIP 0.1uF 6.3V C3013 1-100-506-11 CERAMIC CHIP 6.3V C7007 1-100-504-11 CERAMIC CHIP 0.1uF 6.3V C3015...
  • Page 45 NW-HD1 Ver 1.1 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C9504 1-100-504-11 CERAMIC CHIP 0.1uF 6.3V C9505 1-125-777-11 CERAMIC CHIP 0.1uF FB7001 1-469-082-21 INDUCTOR, FERRITE BEAD (1005) C9506 1-100-504-11 CERAMIC CHIP 0.1uF 6.3V FB7002 1-469-082-21 INDUCTOR, FERRITE BEAD (1005) C9507 1-100-504-11 CERAMIC CHIP 0.1uF...
  • Page 46 NW-HD1 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R1002 1-218-990-11 SHORT CHIP R2027 1-218-935-11 RES-CHIP 1/16W R1005 1-218-977-11 RES-CHIP 100K 1/16W R1006 1-218-977-11 RES-CHIP 100K 1/16W R2028 1-218-935-11 RES-CHIP 1/16W R1007 1-218-977-11 RES-CHIP 100K 1/16W R2029 1-218-935-11 RES-CHIP...
  • Page 47 NW-HD1 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R5005 1-218-990-11 SHORT CHIP R9022 1-208-720-11 METAL CHIP 0.5% 1/16W R5008 1-208-703-11 METAL CHIP 6.8K 0.5% 1/16W R5009 1-208-703-11 METAL CHIP 6.8K 0.5% 1/16W R9023 1-208-720-11 METAL CHIP 0.5% 1/16W R5010...
  • Page 48 NW-HD1 Ver 1.1 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark < VIBRATOR > X1002 1-795-891-21 VIBRATOR, CERAMIC (22.5792MHz) X2001 1-813-362-11 VIBRATOR, CRYSTAL (12MHz) X9501 1-795-602-11 VIBRATOR, CRYSTAL (32.768kHz) ************************************************************ MISCELLANEOUS ************** 1-863-393-11 FLEXIBLE BOARD 1-478-820-11 SWITCH UNIT (H) 1-478-858-11 HDD UNIT ************************************************************...
  • Page 49 NW-HD1 US Model Canadian Model SERVICE MANUAL AEP Model UK Model Ver 1.1 2004.09 SUPPLEMENT-1 Subject: Printed Wiring Boards Modification (Suffix-12) • NEW/FORMER TYPE DISCRIMINATION – MAIN Board (Component Side) – Former type (Suffix-11) R9515 D9501 S9501 BUILT-IN BATTERY R9515 is mounted. New type (Suffix-12) S9501 BUILT-IN BATTERY...
  • Page 50 NW-HD1 DIAGRAMS • Note for Printed Wiring Boards and Schematic Diagrams Note on Printed Wiring Board: Note on Schematic Diagram: • X : parts extracted from the component side. • All capacitors are in µF unless otherwise noted. (p: pF) •...
  • Page 51 NW-HD1 1-1. SCHEMATIC DIAGRAM – MAIN Section (1/7) – (1/7) R7009 470k R7010 470k HDD_CNT USB_CNT RMC_DTCK BACKLIGHT_PWR (Page 5) XRESET_LCD XGSEN XGSEN_PWR_CTL XUSLEEP XUSLEEP XURESET R7003 R7004 R7008 XURESET (Page 7) USB_CNT D33_MODE R7001 (Page 9) R7002 TEST2 100k XICKSTP S_GOHAN VDD12...
  • Page 52 NW-HD1 1-2. SCHEMATIC DIAGRAM – MAIN Section (2/7) – (2/7) GANDHI_CNT GAND_D GA17 R1102 FLASH MEMORY ∗ IC1101 MBM29SL800BE -90PT CSP(Chip Size Package) (NOT SUPPLIED) GA16 GA15 XBYTE GA14 GA13 GD15 DQ15 GA12 GA11 GD14 DQ14 GA10 GD13 DQ13 GA20 GD12 DQ12 C1103...
  • Page 53 NW-HD1 1-3. SCHEMATIC DIAGRAM – MAIN Section (3/7) – (3/7) R5018 TP5003 470k HOLD_KEY BACKLIGHT_PWR S5009 HOLD RMC_DTCK XRESET_LCD USB_CNT (Page 3) CN5001 C5017 D5001 DB15 TP5002 0.01 MA2S728-TX DB14 DB13 R5012 DB12 R5019 DB11 CN5002 DB10 R5008 R5010 R5014 R5016 REPEAT 6.8k...
  • Page 54 NW-HD1 1-4. SCHEMATIC DIAGRAM – MAIN Section (4/7) – (4/7) FS256 GAND_D GAND_A GANDHI_CNT XINTREQH C1010 XINTREQH XINTREQG XINTREQG XINTREQU R1021 R1007 R1026 XINTREQU 470k 100k XOUT (Page 3) C1007 XOUT XRESET_GOHAN R1011 SLEEP_GOHAN R1017 R1016 R1008 470k 470k 470k R1013 C1003 GA12...
  • Page 55 NW-HD1 1-5. SCHEMATIC DIAGRAM – MAIN Section (5/7) – (5/7) C8006 C8007 C8005 0.01 6.3V G-SENSOR B+ SWITCH IC8001 IC8000 SN74LVC1G66DCKR HAAM-301BS DZOUT CSET DYOUT R8008 AOUTX DZOUT AOUTY AD_GSEN_X FSET AOUTZ R8009 AD_GSEN_Y R8002 C8004 R8010 (Page 6) AD_GSEN_Z Q2001 ECH8301-TL-E B+ SWITCH...
  • Page 56 NW-HD1 1-6. SCHEMATIC DIAGRAM – MAIN Section (6/7) – (6/7) CN9501 TP9502 LITHIUM ION BATTERY BATT+ LIS1317HNP BATT- 4.2V 760mAh TP9513 2.4V 1.8V S9501 2.0V BUILT-IN BATTERY (Page 9) AUTO SELECT R9504 POWER SWITCH 100k IC9501 BQ24010ADRCR D9501 IC9504 CUS01(TE85R) TPS2113PWR R9514 C9511...
  • Page 57 NW-HD1 1-7. SCHEMATIC DIAGRAM – MAIN Section (7/7) – (7/7) 1.2V 1.2V 1.8V 1.8V 3.3V 3.3V XCHG_PG (Page 3) C9007 C9012 C9006 C9009 C9013 6.3V 6.3V VSTBY TP9001 2.4V BATT_MON_CTL 1.5V R9016 BATT_MON_CTL 1.5V 100k 1.8V R9018 TP9013 1.8V 470k PWR_FFCLR 3.3V PWR_FFCLR...
  • Page 58 NW-HD1 1-8. PRINTED WIRING BOARD – MAIN Section (Component Side) – :Uses unleaded solder. • Semiconductor Location Ref. No. Location MAIN BOARD (COMPONENT SIDE) J4301 D4101 SWITCH UNIT /LINE OUT FB1011 D4201 IC1002 SET UP D4301 D4445 R1022 MODE , D4302 C1001 C4320 +...
  • Page 59 NW-HD1 1-9. PRINTED WIRING BOARD – MAIN Section (Conductor Side) – :Uses unleaded solder. • Semiconductor Location Ref. No. Location MAIN BOARD (CONDUCTOR SIDE) D4303 D4304 B-10 TP4312 Q1001 Q9002 H-11 Q9004 G-11 TP4314 Q9501 Q9503 C1018 C1019 D4303 TP4308 C4313 D4304 C4315...
  • Page 60 NW-HD1 1-10. PRINTED WIRING BOARD – HDD Section – :Uses unleaded solder. 1-11. SCHEMATIC DIAGRAM – HDD Section – HARD DISK DRIVE UNIT HDD BOARD (COMPONENT SIDE) CN100 CN101 RESERVED RESERVED GND(LOGIC) GND(LOGIC) CN101 VDC(MOTOR) VDC(MOTOR) VDC(LOGIC) VDC(LOGIC) GND(MOTOR) GND(MOTOR) 1-862-778- (12) XDASP...
  • Page 61 NW-HD1 MAIN ELECTRICAL PARTS LIST NOTE: • Items marked “*” are not stocked since they • Due to standardization, replacements in the The components identified by mark 0 or dotted line with mark 0 are parts list may be different from the parts are seldom required for routine service.
  • Page 62 NW-HD1 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C3011 1-100-504-11 CERAMIC CHIP 0.1uF 6.3V C7005 1-100-504-11 CERAMIC CHIP 0.1uF 6.3V C3012 1-100-504-11 CERAMIC CHIP 0.1uF 6.3V C3013 1-100-506-11 CERAMIC CHIP 6.3V C7006 1-100-504-11 CERAMIC CHIP 0.1uF 6.3V C3015...
  • Page 63 NW-HD1 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C9503 1-100-504-11 CERAMIC CHIP 0.1uF 6.3V FB4302 1-218-941-11 RES-CHIP 1/16W C9504 1-100-504-11 CERAMIC CHIP 0.1uF 6.3V FB4303 1-400-198-21 INDUCTOR, FERRITE BEAD (1005) C9505 1-125-777-11 CERAMIC CHIP 0.1uF FB4304 1-400-693-21 INDUCTOR, FERRITE BEAD (1005) C9506...
  • Page 64 NW-HD1 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R2023 1-218-965-11 RES-CHIP 1/16W < RESISTOR/FERRITE > R2024 1-218-965-11 RES-CHIP 1/16W R2025 1-218-965-11 RES-CHIP 1/16W R1001 1-218-985-11 RES-CHIP 470K 1/16W R2026 1-218-935-11 RES-CHIP 1/16W R1002 1-218-990-11 SHORT CHIP R2027 1-218-935-11 RES-CHIP 1/16W...
  • Page 65 NW-HD1 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R5002 1-218-978-11 RES-CHIP 120K 1/16W R9018 1-218-985-11 RES-CHIP 470K 1/16W R5003 1-218-968-11 RES-CHIP 1/16W R9019 1-208-911-11 METAL CHIP 0.5% 1/16W R9020 1-218-970-11 RES-CHIP 1/16W R5004 1-218-990-11 SHORT CHIP R9021 1-208-894-11 METAL CHIP 0.5%...
  • Page 66 NW-HD1 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark VDR9507 1-805-216-21 VARISTOR, CHIP < VIBRATOR > X1002 1-795-891-21 VIBRATOR, CERAMIC (22.5792MHz) X2001 1-813-362-11 VIBRATOR, CRYSTAL (12MHz) X9501 1-795-602-11 VIBRATOR, CRYSTAL (32.768kHz)
  • Page 67 NW-HD1 MEMO...
  • Page 68: Revision History

    NW-HD1 REVISION HISTORY Clicking the version allows you to jump to the revised page. Also, clicking the version at the upper right on the revised page allows you to jump to the next revised page. Ver. Date Description of Revision 2004.07 2004.09 Addition of Canadian model...

Table of Contents