Ide Configuration - Asus Multimedia System S-presso User Manual

PIO Mode [Auto] PIO Mode [Auto]
PIO Mode [Auto] PIO Mode [Auto] PIO Mode [Auto]
Selects the PIO mode. Configuration options: [Auto] [0] [1] [2] [3] [4]
DMA Mode [Auto] DMA Mode [Auto] DMA Mode [Auto]
DMA Mode [Auto] DMA Mode [Auto]
Selects the DMA mode. Configuration options: [Auto] [SWDMA0]
[SWDMA1] [SWDMA2] [MWDMA0] [MWDMA1] [MWDMA2] [UDMA0]
[UDMA1] [UDMA2] [UDMA3] [UDMA4] [UDMA5]
SMART Monitoring [Auto] SMART Monitoring [Auto] SMART Monitoring [Auto] SMART Monitoring [Auto] SMART Monitoring [Auto]
Sets the Smart Monitoring, Analysis, and Reporting Technology.
Configuration options: [Auto] [Disabled] [Enabled]
32Bit Data Transfer [Disabled] 32Bit Data Transfer [Disabled]
32Bit Data Transfer [Disabled] 32Bit Data Transfer [Disabled] 32Bit Data Transfer [Disabled]
Enables or disables 32-bit data transfer.
Configuration options: [Disabled] [Enabled]
4.3.4 4.3.4 4.3.4

IDE Configuration

IDE Configuration IDE Configuration
4.3.4 4.3.4 IDE Configuration IDE Configuration
The items in this menu allow you to set or change the configurations for
the IDE devices installed in the system. Select an item then press <Enter>
to configure the item.
IDE Configuration
Onboard IDE Operate Mode
Enhanced Mode Support On
IDE Detect Time Out (Sec)
Onboard IDE Operate Mode [Enhanced Mode] Onboard IDE Operate Mode [Enhanced Mode] Onboard IDE Operate Mode [Enhanced Mode]
Onboard IDE Operate Mode [Enhanced Mode] Onboard IDE Operate Mode [Enhanced Mode]
Allows selection of the IDE operation mode depending on the operating
system (OS) that you installed. Set to Enhanced Mode if you are using
native OS, such as Windows
using legacy OS including MS-DOS, Windows
Configuration options: [Compatible Mode] [Enhanced Mode]
Refer to the "Parallel ATA and Serial ATA device configuration" section
on page 3-9 for correct IDE configuration settings in different operating
systems.
4 - 1 6 4 - 1 6 4 - 1 6 4 - 1 6 4 - 1 6
[Enhanced Mode]
[S-ATA]
[35]
® 2000/XP. Set to Compatible Mode if you are
® ME/98/NT4.0.
C h a p t e r 4 : B I O S i n f o r m a t i o n C h a p t e r 4 : B I O S i n f o r m a t i o n C h a p t e r 4 : B I O S i n f o r m a t i o n C h a p t e r 4 : B I O S i n f o r m a t i o n C h a p t e r 4 : B I O S i n f o r m a t i o n
Set [Compatible Mode]
when Legacy OS (i.e.
WIN ME, 98, NT4.0, MS
DOS) is used.
Set [Enhanced Mode]
when Native OS (i.e.
WIN2000, WIN XP) is
used.