Wiring Connection - Kenwood KDC-265U Instruction Manual

Wiring connection

IMPORTANT : We recommend installing the unit with a commercially available custom wiring harness specific for your car and leave this job to
professionals for your safety. Consult your car audio dealer.
/
Front output
Rear/ subwoofer output
Antenna terminal
To front speaker (left)
To front speaker (right)
To rear speaker (left)
To rear speaker (right)
Ignition switch
Car fuse box
Car fuse box
Black (Ground wire)
To the metallic body or chassis of the car
Battery
:
Fuse (10 A)
White
If no connections are made, do not let the wire come out from the tab.
White/Black
Gray
Brown
Gray/Black
(Mute control wire)
Green
Green/Black
Purple
Purple/Black
Blue/White
(Power control wire/
Antenna control wire)
Red
(Ignition wire)
Yellow
Light blue/yellow
(Battery wire) (Steering remote
control wire)
/ /
/ :
Rear/ subwoofer output
To the terminal that is grounded when the
telephone rings or during conversation
( 15)
(To connect the Kenwood navigation
system, refer your navigation manual.)
To the power control terminal when using
the optional power amplifier or to the
antenna control terminal in the vehicle
To the steering wheel remote control
adapter
Part list for installation
(A) Faceplate
When connecting to an
external amplifier, connect
its ground wire to the car's
(B) Trim plate
chassis to avoid damaging
the unit.
(C) Mounting sleeve
(D) Wiring harness
(E) Extraction key
(F) Screws (supplied for
/
)
19
ENGLISH