Table of Contents
Advertisement
Insignia Metal Ceramic Heater
Using your heater
1 Make sure that neither the heater nor the power cord has been
damaged in any way during transportation.
2 Place the heater on a firm, level surface, at least three feet (0.9 m) away
from any wall or other objects such, as furniture, curtains, plants, or
combustible material.
3 Fully unwrap the power cord and plug it into a standard wall plug
(120 VAC~60 Hz).
4 Rotate the power setting dial to one of the following settings:
•
•
•
5 Rotate the temperature control dial to the heat level you want. The
heater and power indicator turn on.
When the chosen setting is reached, the heater and the power
indicator turn off.
6 Press the swing switch to start the oscillating fan to circulate the heat.
Cleaning and maintaining your heater
•
Always remove the plug from the wall socket and allow the heater to
cool before cleaning.
•
Wipe the heater with a soft, damp cloth. Use a mild detergent if
necessary.
•
Vacuum the grill with your vacuum's brush attachment every few
weeks for optimal performance.
•
If the heater will not be used for an extended period of time, store it in
a dry place.
Safety features
The heater is equipped with an over-heat device, which causes the unit to
stop operating in the event that the internal temperature exceeds the
normal operating temperature.
If the heater shuts down:
1 Turn off and unplug the heater.
2 Wait for at least 10 minutes until the heater cools.
Caution
HIGH : 1500 watts to quickly warm the room
LOW : 900 watts to slowly warm the room or maintain the
temperature
COOLER: Circulates the air in the room. No heat.
www.insigniaproducts.com
Never leave an operating heater unattended.
7
Advertisement
Table of Contents
