Insignia NS-HTMC01-B Quick Setup Manual

Congratulations on your purchase of this high-quality Insignia
product. Your NS-HTMC01-B, NS-HTMC01-BL, or NS-HTMC01-R
represents the state of the art in desktop ceramic heaters and
is designed for reliable and trouble-free performance.

IMPORTANT SAFETY INSTRUCTIONS

1 Read all instructions before using this heater.
2 This heater is hot when in use. To avoid burns, do not let bare skin
touch hot surfaces. Keep combustible materials, such as furniture,
pillows, bedding, papers, clothes, and curtains at least 3 feet (0.9m) from
the front of the heater and keep them away from the sides and rear.
3 BECAUSE OF THE HOT SURFACE, DO NOT LET CHILDREN NEAR
THIS HEATER WHEN IT IS OPERATING.
4 Always unplug heater when not in use.
5 Do not operate any heater with a damaged cord or plug or after
the heater malfunctions, has been dropped or damaged in any
manner. Discard heater, or return to authorized service facility for
examination and/or repair.
6 Do not use outdoors.
7 This heater is not intended for use in bathrooms, laundry areas
and similar indoor locations. Never locate heater where it may fall
into a bathtub or other water container.
8 Do not run cord under carpeting. Do not cover cord with throw
rugs, runners, or similar coverings. Do not route cord under
furniture or appliances. Arrange cord away from traffic area and
where it will not be tripped over.
9 To disconnect heater, turn controls to off, then remove plug from
outlet.
10 Do not insert or allow foreign objects to enter any ventilation or
exhaust opening as this may cause an electric shock or fire, or
damage the heater.
11 To prevent a possible fire, do not block air intakes or exhaust in
any manner. Do not use on soft surfaces, like a bed, where
openings may become blocked.
12 A heater has hot and arcing or sparking parts inside. Do not use it
in areas where gasoline, paint, or flammable liquids are used or stored.
13 Use this heater only as described in this manual. Any other use
not recommended by the manufacturer may cause fire, electric
shock, or injury to persons.
14 Always plug heaters directly into a wall outlet/receptacle. Never use
with an extension cord or re-locatable power tap (outlet/power strip).
15 SAVE THESE INSTRUCTIONS
Before using your new product, please read these
instructions to prevent any damage.
Quick Setup Guide |

PACKAGE CONTENTS

• Desktop ceramic heater
• Quick Start Guide
FEATURES
• Adjusts automatically, based on ambient temperature
• The built-in fan circulates the heat
• Quiet operation
• Light weight, convenient to carry and move
• Double over-heating protection
• Compact size, suitable for home and office
• Automatically turns off if it tips over
Front
Power indicator
light
NS-HTMC01-B/NS-HTMC01-BL/NS-HTMC01-R
Back
Front panel
PREPARING YOUR DESKTOP CERAMIC
Protective
metal mesh HEATER
1 Remove your heater from the package and place it on a
level surface, such as a desktop or the floor.
2 Plug the power cord into a standard 120V wall outlet.
ON/OFF button
Desktop Ceramic Heater
Air intake
Rear cover
Tip over protection