Chipset - Asus Motherboard P5GC-MX Product Manual

Enhanced C1 Control [Auto]
When set to [Auto], the BIOS will automatically check the CPU's capability
to enable the C1E support. In C1E mode, the CPU power consumption is
lower when idle. Configuration options: [Auto] [Disabled]
CPU Internal Thermal Control [Auto]
Disables or sets the CPU internal thermal control.
Configuration options: [Auto] [Disabled]
Hyper Threading Technology [Enabled]
Allows you to enable or disable the processor Hyper-Threading Technology.
Configuration options: [Disabled] [Enabled]
The following item appears only when you installed an Intel
4 and later processors that supports the Enhanced Intel SpeedStep
Technology (EIST).
Intel(R) SpeedStep Technology [Disabled]
Allows you to use the Enhanced Intel SpeedStep
to [Automatic], you can adjust the system power settings in the operating
system to use the EIST feature.
Set this item to [Maximum] or [Disabled] if you do not want to use the EIST.
The CPU constantly operates at a lower internal frequency when you set
this item to [Minimum].
Configuration options: [Enabled] [Disabled]
2.4.3

Chipset

The Chipset menu allows you to change the advanced chipset settings.
Select an item then press <Enter> to display the sub-menu.
Advanced Chipset Settings
DRAM Frequency
Configure DRAM Timing by SPD
Hyper Path 3
DRAM Throttling Threshold
Boot Graphic Adapter Priority
Internal Graphics Mode Select
Graphics memory type
Boot Display Device
TV Connector
HDTV Output
TV Standard
PEG Buffer Length
Link Latency
PEG Root Control
Slot Power
High Priority Port Select
ASUS P5GC-MX
®
[Auto]
[Enabled]
[Auto]
[Auto]
[PCI Express/Int-VG]
[Enabled, 8MB]
[Auto]
[Auto]
[Auto]
[Auto]
[VBIOS-Default]
[Auto]
[Auto]
[Auto]
[Auto]
[Disabled]
Pentium
®
Technology. When set
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
®
®
2-21