Philips 32PFH5300 User Manual page 53

2 - Select TV settings > Sound > Sound output.
3 - Press  (right) and select Off, TV speakers,
EasyLink or EasyLink autostart.
4 - Press  , repeatedly if necessary, to close the
menu.
To switch speakers directly . . .
1 - While watching TV, press  OPTIONS and select
Picture and sound.
2 - Select Speakers and select TV or Amplifier (audio
device).
3 - Press  , repeatedly if necessary, to close the
menu.
Clear sound
With Clear Sound, you improve the sound for speech.
Ideal for news programmes. You can switch the
speech improvement on or off.
To switch on or off . . .
1 - Press  and select Setup and press OK.
2 - Select TV settings > Sound > Advanced > Clear
Sound.
3 - Press  (right) and select
4 - Press  , repeatedly if necessary, to close the
menu.
HDMI ARC
If you do not need an Audio Return Channel (ARC) on
any of the HDMI connections, you can switch the ARC
signal off.
For more information, press
up HDMI ARC.
Audio out format
With Audio out format you can set the audio out
signal of the TV to fit the sound processing
capabilities of your Home Theatre System.
For more information, press
up Audio Out format.
Audio out levelling
With Audio out leveling you can level the sound
volume of the Home Theatre System with the volume
of the TV when you switch over from one to another.
For more information, press
up Audio Out leveling.
On or Off.

Keywords and look

Keywords and look

Keywords and look
Audio out delay
If you set an Audio sync delay on your Home Theatre
System, to synchronise the sound with the picture,
you must switch off Audio out delay on the TV.
For more information, press
up Audio Out delay.
Audio out offset
If you cannot set a delay on the Home Theatre
System, you can set a delay on the TV with Audio out
offset.
For more information, press
up Audio Out offset.
Speakers
Home Theatre System
You can send the TV sound to a connected audio
device - a Home Theatre System or audio system.
You can select where you want to hear the TV sound
and how you want to control it.
• If you select Off, you permanently switch off the TV
speakers.
• If you select TV speakers, the TV speakers are
always on.
With an audio device connected with HDMI CEC, you
can use one of the EasyLink settings.
• If you select EasyLink, the TV sends the TV sound to
the audio device. The TV will switch off the TV
speakers when the device is playing the sound.
• If you select EasyLink autostart, the TV will switch
on the audio device, send the TV sound to the device
and switch off the TV speakers.
With EasyLink or EasyLink autostart selected, you can
still switch to TV speakers if necessary.
To set the TV speakers . . .
1 - Press  and select Setup and press OK.
2 - Select TV settings > Sound > Sound output.
3 - Press  (right) and select Off, TV speakers,
EasyLink or EasyLink autostart.
4 - Press  , repeatedly if necessary, to close the
menu.
To switch to speakers directly . . .
1 - While watching TV, press  .
2 - Select Speakers and select TV or Amplifier
(audio system).
3 - Press  , repeatedly if necessary, to close the
menu.
53

Keywords and look

Keywords and look