Related Manuals for HID R10-H
Summary of Contents for HID R10-H
- Page 1 GOVERNMENT SOLUTIONS for Physical Access R10-H, RP10-H, R15-H, RP15-H, R30-H, RP30-H, R40-H, RP40-H, RK40-H, RPK40-H, RKCL40-P, RPKCL40-P, RKCLB40-P, RPKCLB40-P pivCLASS® Reader Installation Guide PLT-01134 A.2...
-
Page 2: Parts List
Wiegand Cable Lengths: R = RS-485 (OSDP) 100 ft (30.5 m) 22 AWG @ 5 - 6.4VDC 500 ft (152 m) 22 AWG @ 6.5 - 16VDC INSTALLATION GUIDE © 2012 - 2014 HID Global Corporation/ASSA ABLOY AB. All rights reserved. - Page 3 Mounting holes for US double-gang electrical boxes. Reverse Configuration Flipping the backplate allows for placing the Contact reader on left and the Keypad reader on right. © 2012 - 2014 HID Global Corporation/ASSA ABLOY AB. All rights reserved. INSTALLATION GUIDE...
- Page 4 Hold Input Gray P2-1 GPIO4 (RS485-FDX-Y) See Note 1 Notes RS-485 applicable for pivCLASS readers. Tamper Output - When activated, output synchronizes to ground (default). Dependent upon reader configuration. See the HTOG for Wiegand and Clock-in-Data configurations. INSTALLATION GUIDE © 2012 - 2014 HID Global Corporation/ASSA ABLOY AB. All rights reserved.
- Page 5 Reversed Configuration: Slide Reader Assembly to the left to lock. Contact Technical Support for wiring the reverse configuration. Default: Slide Reader Assembly towards the right to lock. © 2012 - 2014 HID Global Corporation/ASSA ABLOY AB. All rights reserved. INSTALLATION GUIDE...
- Page 6 R10-H, RP10-H, R15-H, RP15-H, R30-H, RP30-H, R40-H, RP40-H, RK40-H, PLT-01134 A.2 RPK40-H, RKCL40-P, RPKCL40-P, RKCLB40-P, RPKCLB40-P Power & Testing Contactless Models Turn on power Test card Contact Models Turn on power Test card INSTALLATION GUIDE © 2012 - 2014 HID Global Corporation/ASSA ABLOY AB. All rights reserved.
- Page 7 R10-H, RP10-H, R15-H, RP15-H, R30-H, RP30-H, R40-H, RP40-H, PLT-01134 A.2 RPK40-H, RKCL40-P, RPKCL40-P, RKCLB40-P, RPKCLB40-P Intentionally Blank © 2012 - 2014 HID Global Corporation/ASSA ABLOY AB. All rights reserved. INSTALLATION GUIDE...
- Page 8 Connect only to a Listed Access Control / Burglary power-limited power supply. These readers are intended to be used with listed (UL294) control equipment. RKCLB40-P and RPKCLB40-P readers are suitable for indoor use. R10-H, RP10-H, R15-H, RP15-H, R30-H, RP30-H, R40-H, RP40-H, RK40-H, RPK40-H, RKCL40-P and RPKCL40-P are suitable for outdoor use.