• If all parts are not there, please do not commence installation, as this will mean revisiting the install more than once. Parts should include: 1 x Fleetminder PLATINUM NXTG unit 1 GPS/GPRS combo antenna 1 Main wiring harness 1 Panic Button...
Page 4
• Make sure that no cables get crimped during installation. • Make sure there is enough cable length to reach the unit. • Connect the gold connector from the GPS antenna to the gold connector on the unit, making sure it is secured. fleetminder Installation Manual Page 2...
Page 5
• In most cases relays will have to be used for the Outputs. • Suggested Outputs: Door Unlock, Flash Lights, Disable Starter Motor. • Input 1 is Positive trigger (12V+ or 24V+)- Reserved for IGN • Input 2 is Negative (GND) trigger. fleetminder Installation Manual Page 3...
Refer to your service agreement which will include your username, password and the software link. • SMS Tracking Refer to Command list for setting up the device using SMS. fleetminder Installation Manual Page 4...
Page 7
IV) Remove the SIM card from the device. The SIM card slot is pictured below. V) Insert the SIM card in the new device. VI) Replace the back panel of the device, securing it with the screw, to maintain the dustproof standard. fleetminder Installation Manual Page 5...
Installation Manual LED Troubleshooting The Fleetminder NXTG has LED indicators on the front of the device, that can be used for diagnosis of the device. They explain the functionality of the device by their status explained below. On solid state...
Page 10
Indicator) spot with clear view of the sky. The vehicle must be outside to be able to get a GPS fix. This page has been left blank intentionally. fleetminder Installation Manual Page 8...
Need help?
Do you have a question about the platinum nxtg and is the answer not in the manual?
Questions and answers