Advertisement
Quick Links
Advertisement
Related Manuals for NetComm Express series
Summary of Contents for NetComm Express series
- Page 1 NETCOMM EXPRESS SERIES Dual Port VoIP Adapter...
-
Page 2: Hardware Installation
Hardware Installation 1. With the supplied Ethernet cable, connect the LAN port of your modem/router to the WAN port on the back of your VoIP ATA 2. If you would like your PC to be connected to the network through your VoIP ATA connect another Ethernet cable (not supplied) from your PC to the LAN port on the back of your VoIP ATA. -
Page 3: Software Configuration
Software Configuration 1. Insert the supplied CD into your PC. The CD should auto-run 2. The default Internet access is DHCP Client Mode. Click on WAN Configuration to change the Internet access type. 3. Enter the SIP Proxy Domain, Proxy Server, Outbound Proxy, Username, Auth. ID and Auth. -
Page 4: Troubleshooting
Troubleshooting Cannot establish a connection • You can use the web interface for more advanced setup options • Open a web browser (e.g. Internet Explorer, Safari) and type 192.168.22.1 into the address bar and press Enter • Enter the default username and password which is admin for both... - Page 5 • Under the Configuration tab on the left hand menu, select WAN for advanced Internet settings • Under the Configuration tab on the left hand menu, select VoIP and click on SIP Service Provider for advanced VoIP settings • Click on Save Settings/Reboot to use the newly entered settings...
- Page 6 NetComm Microfilter Series ADSL2+ Splitter-Filter-EM1550 Stops your ADSL signal from interfering with telephones and fax machines Designed to get the best from your ADSL2+ Internet connection Telstra Approved Splitter and filter in 1. Connect your telephone/fax and ADSL modem to a single...
Need help?
Do you have a question about the Express series and is the answer not in the manual?
Questions and answers