Set The Midi Channel - Roland HP 237R Owner's Manual

Hide thumbs Also See for HP 237R:
Table of Contents

Advertisement

Receiving on all MIDI channels–
Omni On/Off
When set to Omni On, the HP 237R will sound as a result of
received MIDI messages, no matter which channel the
messages arrive on.
When set to Omni Off, the HP 237R will recognize only the
messages that arrive on the MIDI channel that has been
selected, as explained under "Set the MIDI Channel."
Switching Omni On/Off
Omni On is automatically set when the power is switched on.
Hold down the [Piano 1] button, the [Piano
2] button, and the [Harpsichord] button,
and press the "F4" note to turn the setting
On, or the "G4" note to turn the setting Off.
fig.8-08.e
Electric
Piano 1
Piano 2
Piano 1
Tempo
Beat
40 60 80 96
120 168
208
0
2
3
4
6
Sound
On / Off
Metronome
This Manual: http://www.manuallib.com/file/2725302
Electric
Harpsi-
Vibra-
Pipe
Piano 2
chord
phone
Organ
Tone
Play
Rec
Demo Song
Omni On
Omni Off

Set the MIDI Channel

MIDI features sixteen MIDI channels, numbered 1–16.
The connected devices must be set to use the same MIDI
channels, otherwise no sound will be produced.
- In a setup where you wish to play the HP 237R and also
have another MIDI-equipped instrument or sound
module play the same notes, you should first set the
channel used for reception on your external device to the
same channel that you have the HP 237R set to use for
transmission.
- If using another MIDI keyboard as a master instrument,
and you wish to have the HP 237R played by it, you
would need to set the channel used for reception on the
HP 237R to the same channel that the master keyboard
will be transmitting on.
Strings
- When wishing to have a sequencer play the HP 237R, you
need to set the channel used or reception on the HP 237R
to the same channel that the recorded MIDI data is set to
use.
When the HP 237R is turned on, Channel "1" is selected.
While holding down the [Piano 1], [Piano 2],
and [Harpsichord] buttons, press the
appropriate key (C2–D4) on the keyboard.
The MIDI transmit channel and receive channel will
switch to the number that corresponds to the note you
pressed.
fig.8-09.e
Piano 1
Max
Reverb
Chorus
Connecting to MIDI Devices
Electric
Electric
Harpsi-
Piano 2
Piano 1
Piano 2
chord
Tone
Electric
Electric
Harpsi-
Vibra-
Pipe
Tempo
Beat
Piano 1
Piano 2
Piano 1
Piano 2
chord
phone
Organ
Strings
40 60 80 96
120 168
208
0
2
3
4
6
Sound
On / Off
Play
Tone
Metronome
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
MIDI channel
Vibra-
Pipe
phone
Organ
Strings
Rec
Demo Song
33

Advertisement

Table of Contents
loading

Table of Contents