Remote Management Statistics; Rmon Statistics; Ethernet Statistics - METRObility Optical Systems RADIANCE 10/100MBPS ACCESS OPTICAL NETWORK UNIT Installation & User Manual

Disabling a port stops the data flow to and from that port. Although data is
neither sent nor received, the disabled port continues to accept, process and
transmit management packets. However, if LLCF is enabled and the opposite
port has no link, management packets will not be transmitted.

Remote Management Statistics

Through SNMP management, NetBeacon or WebBeacon, you can view Remote
Monitoring (RMON) and Ethernet statistics for the Access ONU.

RMON Statistics

Each port on the Access ONU supports the complete RMON Group 1 statistics
outlined in RFC 1757 and listed below.
EtherStatsOctets
EtherStatsBroadcastPkts
EtherStatsCRCAlignErrors
EtherStatsFragments
EtherStatsCollisions
EtherStatsPkts65to127Octets
EtherStatsPkts256to511Octets
EtherStatsPkts1024to1518Octets
Dropped Events

Ethernet Statistics

The Ethernet statistics listed in the table below are provided for the Access
ONU's fiber port. For the copper port, only the Port Link Status is reported.
Statistic Name
Port Link Status
Link Transition Counter Number of times link was lost since power-up.
Management Counter
Discovery Count
Radiance 10/100Mbps Access Optical Network Unit
EtherStatsPkts
EtherStatsMulticastPkts
EtherStatsUndersizePkts
EtherStatsJabbers
EtherStatsPkts64Octets
EtherStatsPkts128to255Octets
EtherStatsPkts512to1023Octets
EtherStatsOversizePkts
Description
Indicates whether or not the port has a valid link.
The value is 0 after the card is reset, even without a link.
Number of management packets received.
Number of remote devices discovered on the network.
15