Troubleshooting; General; About Bluetooth Device - Philips SB2000 User Manual

Hide thumbs Also See for SB2000:
Table of Contents

Advertisement

8 Troubleshooting

Warning
Never remove the casing of this product.
To keep the warranty valid, never try to repair
the product yourself.
If you encounter problems when using this
device, check the following points before
requesting service. If the problem remains
unsolved, go to the Philips Web page (www.
philips.com/support). When you contact the
Consumer Care, make sure that the product
is nearby and the model number and serial
number are available.

General

No power
Recharge your speaker.
No sound
Adjust volume on this product.
Adjust volume on the connected device.
Make sure that your Bluetooth device is
within the effective operational range.
No response from the speaker
Restart the speaker.

About Bluetooth device

The audio quality is poor after connection
with a Bluetooth-enabled device.
The Bluetooth reception is poor. Move the
device closer to this product or remove
any obstacle between them.
Cannot connect with the device.
The Bluetooth function of the device is not
enabled. Refer to the user manual of the
device for how to enable the function.
This product is already connected with
another Bluetooth-enabled device.
Disconnect that device and then try again.
The paired device connects and disconnects
constantly.
The Bluetooth reception is poor. Move the
device closer to this product or remove
any obstacle between them.
For some devices, Bluetooth connection
may be deactivated automatically as a
power-saving feature. This does not indicate
any malfunction of this product.
EN
11

Advertisement

Table of Contents
loading

Table of Contents