Replacing The Memory - BenQ nScreen i91 series User Manual

Replacing the memory

You can replace the existing memory module with a higher-
capacity one. Before you upgrade or replace memory, please
check on the BenQ web site to determine the module which can
be used, or contact BenQ distributor or customer service center.
It is recommended that you take your nScreen to the BenQ
distributor or customer service center for the upgrade or
memory replacement.
For details about the limit of maximum memory, refer to the
product information from http://www.BenQ.com. Click
>
Products Computing
purchased model. Click
maximum memory.
To find out the types of BenQ certified memory modules for
your nScreen, try the steps below:
1. Connect to BenQ Online Service and Support
(http://www.benq.com/support/).
2. Click Knowledge Base.
The website layout and content may vary by region/country.
• If you install an uncertified memory module, your system may
not work properly.
• It is the sole responsibility of the user if problems (such as
data loss and system failure) occurred due to non-factory
installed software, parts, and/or non-original accessories.
1. Shut down your nScreen completely. Disconnect the power
adapter and turn over your nScreen.
36 Replacing the memory
> nScreen, and then select your
to find out the limit of
Specifications
2. Pull out the back cover from the bottom as illustrated. The
back cover may still be secured with one lock slot on the left
and one on the right, and four more lock slots at the top. You
might need to try pulling out the back cover from different
places from the bottom of the back cover.
If you feel difficult to remove the back cover, do not force to do
it to avoid possible damage. You are advised to bring your
nScreen to BenQ Customer Service and ask help for replacing
the memory module.