Creating Recovery Discs; Creating A Factory Recovery Cd/Dvd - BenQ nScreen i91 series User Manual

• To view information about the applications and drivers
that are bundled with your nScreen.
3. Follow the remaining on-screen instructions to complete the
operation.

Creating recovery discs

To use this function, your nScreen must come with a CD/DVD
burner. If your model does not come with a CD/DVD burner,
use an external CD/DVD burner instead if you wish to create
discs.
Depending on your purchased model, your nScreen may come
with bundled applications and software programs. If you intend
to use discs to restore your system and reinstall the bundled
applications and software programs that came with your
nScreen, insert the recovery discs and the Application and
Drivers DVD created using QDataTrove into the optical drive of
(or connected with) your nScreen, and follow the on-screen
instructions.
QDataTrove allows you to create the following important discs
for your system:
• Recovery discs:
• Factory Recovery CD/DVD
• User Recovery CD/DVD
• Bootable USB flash Disk

Creating a Factory Recovery CD/DVD

You can use QDataTrove to create a recovery disc that includes
factory default system image, and a disc that includes
applications and drivers that are bundled with your nScreen.
Important:
It is strongly recommended to create Factory Recovery CD/
DVD immediately once your nScreen is ready for use.
1. Click the button to select
.
CD/DVD
2. Select a disc type from the
menu. Click to proceed.
OK
3. Insert a blank disc when prompted to do so, and then click
.
Yes
4. Select your preferred burning speed, and then click
5. The disc burning process starts. A
window appears on the screen and
Recovery CD/DVD
displays the current status.
Please note that the burning process cannot be interrupted
once started.
6. Continue to create a factory default Application and Driver
DVD. Repeat Step 2 to Step 5 to complete the disc burning
process.
7. After disc burning finishes (the progress bar shows 100%
completion), click at the top right corner of the window
to proceed.
8. Click and then to leave the application.
Exit Yes
Store the discs in a safe place for future use.
Recovering your system using QDataTrove in Windows XP
Create Factory Recovery
drop-down
Disc Category
.
OK
Create Factory
33