uuBatteryuCharging the Battery
Charging the Battery
Disconnect both battery cables to prevent damaging your vehicle's electrical system.
Always disconnect the negative (–) cable first, and reconnect it last.
*1: Models with the smart entry system have an ENGINE START/STOP button instead of an
ignition switch.
* Not available on all models
526
1Battery
When you find corrosion, clean the battery terminals
by applying a baking powder and water solution.
Clean the terminal with a damp towel. Cloth/towel
dry the battery. Coat the terminals with grease to
help prevent future corrosion.
When replacing the battery, the replacement must be
of the same specifications.
Please consult a dealer for more information.
The VSA® and CMBS
TM*
indicators may come on
when your turn the ignition switch to ON
re-connecting a battery.
Drive a short distance at 12 mph (20 km/h). Each
indicator should go off. If either or both do not, have
your vehicle checked by a dealer.
*1
after
(
w