Technics OTTAVA SC-C500 Operating Instructions Manual page 37

Network settings
"Network"
Network standby
"Network Standby"
This unit can turn on automatically from standby
mode when this unit is selected as the network
device's output speakers.
• The factory default is "Auto".
Auto:
Enables the network standby function when
the network connection is available.
On:
Always enables the network standby function.
Note
• If this function is set to "On" or "Auto", the
standby power consumption will increase.
• Power indicator lights red when the network
standby function is available.
Wireless LAN setting
"Wi-Fi"
The wireless LAN function can be enabled or
disabled.
• The factory default is "Off".
Wi-Fi signal strength
"Signal Level"
To check the Wi-Fi signal strength where this
system is located.
• It is recommended to have a signal strength
of "3". Change the position or angle of your
wireless router or this system if the indicator is
"2" or "1" and see if the connection improves.
• If "0" is displayed, this system cannot establish
a link with the wireless router.
Changing the character
encoding
"E Asian Character"
You can change the character encoding of track
names, artist names and other information
when they are not displayed as they should be.
Type 1(⽇本):
Priority is given to Japanese. (default)
Type 2(简体字):
Priority is given to Chinese (Simplified).
Checking the firmware version
"F/W Version"
The version of the installed firmware is
displayed.
37
Settings