Haier D85 User Manual page 47

When the tablet is connected to the computer, the user can do some operations, such as
copy, paste, delete, and installation.
User opens the USB device, the interface will change to the figure shown below.
Important Note:
1) Enable Auto Connect in "Connect to PC" in the setting menu, so that whenever you
plug the device to the PC the system will automatically get connected.
2) Don't disconnect the device during the data copying or deleting process as this could
cause the unit to malfunction and damage the software. Disconnect it using the "Safely
remove hardware" icon at the bottom on the task bar.
3) The micro USB port on the tablet marked as Micro-USB is for loading your USB device
User Guide
- 12 -