Please read this manual before you begin!
Failure to follow this manual's instructions may
result in damage to the Triangle Power Base, AC
NG400
Adapter and/or Laser Pegs®. Not adhering to
these instructions will void the manufacturer's
SPACE
warranty. The packaging must be kept because
Ages 5 +
it contains important information.
24 Models+
WARNING:
CHOKING HAZARD
-
Small parts.
ANY CREATION YOU CAN BUILD
Not for children under 3 yrs.
LIGHT UP
Do not submerge in water.
CONSTRUCTION SET INCLUDES:
• 36 Laser Pegs®
• 125 Construction Parts
• Laser Pegs® Peg Cord
• Triangle Power Base
• Instruction Manual
Construction Compatible
Requires 3-AA Batteries
Compatible with other construction kits
Batteries NOT
EN71, RoHS COMPLIANT
Included
This product complies to
all safety requirements
of ASTM F 963
MODEL INSTRUCTIONS
All additional model instructions can
be downloaded at www.LaserPegs.com
Laser Pegs® Parts List
x9
There is No LED In The 90 Degree Peg
SQUARE
PEG
x3
x1
x1
x2
x1
x2
STRAIGHT
x5
SQUARE
STRAIGHT
90° PEG
STRAIGHT
45° PEG
PEG
M-M PEG
T PEG
M-M PEG
Y PEG
Each Laser Peg® is color coded on the circuit board inside
Color
Code
each shape. There is No LED In The 90 Degree Peg.
Laser Pegs
®
Stackable
Laser Pegs
®
link that
Laser Pegs
Sound Activated
allows you to connect to
Peg Cord
Triangle Power Base
other construction kits.
Construction Parts List
x5
x8
x18
x8
x2
x4
x2
x7
x4
x8
x8
x5
x2
x2
x2
x6
x2
x6
x2
www.LaserPegs.com
This manual is copyright and cannot be reproduced or used online without Laser
Pegs®Ventures LLC permission. Copyright 2014 © All Rights Reserved US Patent
#7,731,558 Additional Global & Multiple Patents Pending. Laser Pegs®Ventures
LLC. 8304 Consumer Ct Sarasota FL. 34240. Contact: Support@LaserPegs.com
Connecting Pegs
To construct with Laser Pegs®, slide two pieces together to form a
connection. Slide each piece on and off smoothly. The 90° Pegs are
essential to construction but they DO NOT LIGHT UP.
Environmental Phenomena
* The unit may malfunction if subjected to radio-frequency interference. It SHOULD revert to
normal operation when the interference stops. If not, it may become necessary to turn the power
off and back on, or remove and reinstall the batteries.
* In the unlikely event of an electrostatic discharge, the unit may malfunction and lose memory,
requiring the user to reset the devise by removing and reinstalling the batteries.
Push Red
Red
Power Button
Power Button
to turn on/off
Push Red Power Button to
cycle through 4 different
light settings.
AC Adapter
SOUND/ON/FLASH/FLASH FASTER
Connection
WARNING: STROBE LIGHTS
The toy is not to be connected to more than
the recommended number of power supplies
MAY CAUSE SEIZURES
Replacing Batteries
1. Remove the three (3) screws.
2. Place three (3) AA batteries in the correct
position - as displayed inside the Triangle
Remove the 3 Phillips head screws
Power Base.
3. Reassemble the Triangle Power Base.
4. Replace the three (3) screws.
5. Push RED Power Button to turn on!
6. Do not mix old and new batteries.
7. Do not mix alkaline, standard (carbon-
x4
zinc), or rechargeable (nickel-cadmium,
NiMH) batteries!
8. Exhausted batteries are to be removed
WHEEL PEG
Add 3-AA Batteries
from the Triangle Power Base.
9. Never connect more than 200 Laser Pegs®
10. Non-rechargeable batteries are not to be
recharged.
11. Rechargeable batteries are only to be
x8
recharged under adult supervision.
STACKABLE
12. Rechargeable batteries are to be removed
from the toy before being recharged.
13. Batteries are to be inserted with the
correct polarity.
14. The supply terminals are not to be short-
circuited.
15. DO NOT THROW BATTERIES INTO FIRE!
Please dispose of batteries properly as per state and local regulations.
Using an
AC Adapt
er
®
Remove all batteries
from Laser Pegs® power
x4
base before using the
5-volt AC adapter.
x6
*To avoid short-circuits, keep metal objects and
x6
other unauthorized materials from obstructing
the peg holes.
The AC adapter and the Triangle Power Base are to be regularly examined for
x4
damage to the cord, plug, enclosure and other parts, and in the event of such
damage, they must not be used until the damage has been repaired.
x2
WARNING! Each Laser Peg® draws current from the batteries. Therefore, the more
pegs you use, the quicker you will deplete your battery power! As the power
x2
weakens, the current will slowly fail and some Laser Pegs® will illuminate (typically
the reds and yellows) and some won't. When the Laser Pegs® dim the Laser Pegs®
are not broken, they just need stronger batteries or an AC Adapter.
You have 3 simple options...
1. Use a 5-volt AC Adapter –available from www.LaserPegs.com
2. Change the batteries.
3. Use high quality batteries. They will last a little longer, but they will still deplete
rapidly the more laser pegs you connect!
DO NOT SUBMERGE IN WATER
STAR CRUISER: The first human spaceflight missions were managed by national governments.
Today, some private companies offer programs for tourists.
STAR CRUISER
Model
Difficulty
Level
5
Peg Holes
A
STEP
1
Remove the three Phillips head
screws with a 4mm screw driver.
Requires (3AA) Batteries
STEP
2
When using an AC
Adapter, NEVER
place the adapter
plug into the Tri-
angle Power Base
top peg holes.
Never connect more than 200
STEP
3
Laser Pegs® when using a 5-volt
(2000mA) AC Adapter.
Laser Pegs® CARES
Questions? Comments?
For additional compliance info:
1-866-432-3735
Contact: Support@LaserPegs.com
B
COMBINE
A
STEP
4
STEP
5
STEP
6
STEP
7
C
STEP
8
B
Need help?
Do you have a question about the NG400 and is the answer not in the manual?
Questions and answers