Assemble Your Device; Charge The Battery - Samsung galaxy view User Manual

Assemble Your Device

This section helps you to
assemble your device.
Install an Optional Memory Card
You can install an optional microSD or microSDHC
memory card (not included) to expand available
memory space.
Note: A memory card can be installed at any time; it
is not necessary to install it prior to using the device.
For more information on installing a memory card,
see Install a Memory

Charge the Battery

Your device is powered by a rechargeable, standard
Li-Ion battery. A Wall charger is included with the
device for charging the battery.
The battery comes partially charged. A fully
discharged battery requires up to four hours of
charge time. You can use the device while charging.
Caution: Use only Samsung-approved charging
devices and batteries. Samsung accessories are
designed to maximize battery life. Using other
accessories may invalidate your warranty and may
cause damage.
Note: The USB port does not support charging.
Getting Started
Card.
1. Insert the charger into the DC jack.
2. Plug the charging head into a standard AC power
outlet.
3. When charging is complete, unplug the charging
head from the power outlet and remove the
charger from the DC jack.
When to Charge the Battery
When the battery is low and only a few minutes of
operation remain, the device sounds a warning tone
at regular intervals.
In this condition, your device conserves its
remaining battery power by dimming the screen.
When the battery level becomes too low, the device
automatically turns off.
► For a quick check of your battery level, view
the battery charge indicator located in the
upper-right corner of your device's display. A
solid color ( ) indicates a full charge.
You can also choose to display a percentage
value. Viewing a percentage value can provide
a better idea of the remaining charge on the
battery. For more information, see Battery.
4 Assemble Your Device