Advertisement
Features
• 8 Channels*
• 121 Privacy Codes
(38 CTCSS codes/83 DCS codes)
• Hands-Free Operation (VOX)
• Scan
Channels, privacy codes
• Backlit LCD Display
• Call Alert
Five selectable tones
• Button Lock
• Speaker/Microphone/ Charge Jack
• Roger Beep
Selectable On/Off
• Battery/Power Saver
• Keystroke Tones
• Battery Level Indicator
• Auto Squelch
• Maximum
Range Extender
• Belt Clip
Product Information
This microTALK
radio has been manufactured to
®
meet all required standards for radio equipment
using PMR 446 frequencies as authorized. The
use of this two-way radio product involves the
public airways and its use may be subject to local
laws or regulations. Contact your radio licensing
authority for more information.
2
English
3
4
1
11
2
10
9
1. Battery Level Indicator
7. DCS/CTCSS Icons
2. VOX Icon
8. DCS/CTCSS Privacy
Code Numbers
3. Scan Icon
9. Power Saver Icon
4. Roger Beep Icon
10. Channel Numbers
5. Lock Icon
11. Receive/Transmit Icon
6. Key Stroke Icon
* You are not allowed to use channels 1 and 2 in France.
This situation can change; please contact the French radio
licensing authority for more information.
Caring for Your Radio
Your microTALK
radio will give you years of
®
trouble-free service if cared for properly. Here are
a few suggestions:
• Handle the radio gently.
• Keep it away from dust.
• Never put the radio in water or in a damp place.
• Avoid exposure to extreme temperatures.
Operation
Installing Batteries
To install or replace batteries:
1. Remove belt clip by releasing belt clip
Remove Belt Clip
5
latch and sliding clip up.
2. Pull up on the battery door latch to remove the battery compartment cover.
6
3. Insert the supplied three AA rechargeable batteries or non-rechargeable
alkaline batteries. Position batteries according to polarity markings.
7
Pull Up Lock Latch
4. Replace battery compartment cover and
belt clip.
• Do not attempt to charge alkaline batteries.
• Do not mix old and new batteries.
8
• Do not mix alkaline, standard (carbon-zinc), or rechargeable
Insert Batteries
(Ni-Cd, Ni-MH, etc.) batteries.
Caution – Risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions.
To charge batteries in radio:
Radio Charger Jack
1. Check to see that the batteries have been inserted properly.
2. Insert the cable into the charge jack located at the top of the radio.
3. Plug the cable into USB-compatible power port.
Use only the supplied rechargeable batteries and charger for recharging your Cobra microTALK radio.
The radio is not intended to be used while being charged.
Non-rechargeable alkaline batteries can also be used in your radio.
Maximum/Minimum Operating Range: -20°C to +45°C.
Quick Start
1. Press and hold the Mode/Power button to turn on your radio.
2. Press the Channel Up or Channel Down button to select a channel.
Both radios must be tuned to the same
channel/privacy code to communicate.
3. Press and hold the Talk button while speaking into the microphone.
4. When finished talking, release the Talk button and listen for a response.
3
Hide quick links:
Advertisement
