Advertisement
Note: once the copter ascends to a height of 30cm or above, it will suffer from the
"ground effect" and the performance will become unstable. With practice you will be
able to control this.
When the copter continually spins to the left, please
press the right trimming button until it stops spinning.
When the copter continually spins to the right, please
press the left trimming button until it stops spinning.
Press and hold the speed conversion button while turning
on the power switch. This will reset the trim settings.
When the copter flies sideways
(towards the left) in the process
of hovering, please press the
right-hover trimming button
until it stops.
When the copter flies sideways
(towards the right) in the
process of hovering, please
press the left-hover trimming
button until it stops.
When the copter flies
backwards in the process of
hovering, please press the
forward-hover trimming button
until it stops.
When the copter flies forwards
in the process of hovering,
please press the backward-
hovering trimming button until
it stops.
4
Advertisement
