Volume - Gigaset PA530 AUDIO plus User Manual

Operation

Volume

Parent Unit
You can adjust the volume at which you hear your baby by using the keys  and  on the
parent unit.
Press Volume keys
10 Levels (VOL 01 to VOL 10, VOL 01 = MUTE). User could adjust the received baby voice.
• 1 beep tone for each volume key pressing
• 3 beep tone as warning of volume limit (max / min). The LCD will display [VOL MAX] or
[VOL MIN] for 3sec and then exit to Top Level Display Mode
• Beep tone is constant and not volume control
• Every time user press Volume keys
example "VOL 05". If user no any key command for 3sec, the LCD will clear the volume
setting display and exit to Top Level Display Mode
• Volume keys
Volume adjustment can only be allowed in Top Level Display Mode. Because these 2 keys
will use as up/down in menu level
• It has last memory function after power off
Baby Unit
Using the Volume keys
(when speaking from the parent unit) and the lullabies (only for the internal source). If a MP3
player is connected to the baby unit, the volume is adjusted by the MP3 player volume keys.
Press Volume keys
10 Levels (VOL 01 to VOL 10, VOL01=very small volume for lullaby play, VOL 01= MUTE for
when baby receive voice from parent). User could adjust the lullaby output or received talk
back from parent voice level.
• No tone for each volume key pressing
• 1 beep tone as warning of volume limit (max / min)
• Beep tone is constant and not volume control
• Internal Lullaby is with volume control
• External MP3 Player Audio In is constant and no volume control
• It has last memory function after power off
ECO MODE
When the Parent comes close to the baby unit, the transmission power will be dynamically
reduced to save the power
or will increase or decrease the speaker output. Totally
or can only be working as volume control in Top Level Display.
or on the baby unit you can adjust the volume for your voice
or will increase or decrease the speaker output. Totally
or , the LCD displays the volume setting for
25
en