Operation; Powering On/Off The Baby Monitor - Gigaset PA530 AUDIO plus User Manual

Available languages

Operation

Once you have set up your baby monitor, you will be able to hear the sounds in your baby´s

room through the parent unit. You will also be able to see those sounds as the sound sensor

lights on the parent unit, which rise and fall with the volume level.

Note

If the connection between the parent unit and baby unit is broken at any time the green "Link"

light on the parent unit will flash and you will hear short beeps. To re-establish the "Link",

follow the directions in the "Troubleshooting" chapter.

After having connected the baby monitor you will have to switch on both units.

Press and hold down the On/Off key

To switch off the unit press and hold down the On/Off key

Parent Unit

• Long press On/Off key

flashing in 0.5s on and 0.5s off during linking. Antenna Icon is turned off.

• It becomes steady Green when linked. Antenna Icon

• It becomes flashing Green Flashing if linking failed. Antenna Icon is turned off.

Baby Unit

• Long press On/Off key

flashing in 0.5s on and 0.5s off during linking.

• It becomes steady Green when linked.

• It becomes flashing Green Flashing if linking failed.

on each unit.

2 sec to turn on unit. Power LED will turn On in Green and then

again.

is turned on.

Table of Contents