Miele KF1803 Vi Installation Instructions Manual page 23

Now connect the water supply to the
appliance (see "Plumbing").
Preparing the custom door
For best results, it is important to
mount the upper door before the
lower door.
^ Open the appliance door.
^ Unscrew the installation supports l
from the appliance door.
^ Loosen the remaining screws from
the strips m on each side of the door,
then remove.
^ Set aside the screws and side strips
m - you will need them again later.
^ Remove the light switch cover (see
arrow).
Installing the appliance
^ Measure the distance X between the
bracket from the upper door and the
overhead furniture/fixtures.
^ Loosen the two nuts.
Set aside the nuts - you will need
them again later.
^ With the inside facing up, lay the
custom door on a stable surface (to
avoid scratch marks, place some
plastic or a cloth on the surface).
73