Using Add 30 Sec; Setting Two-Stage Cooking - Kenmore 790.8032 Series Use & Care Manual

USING ADD 30 SEC. (Control Panel Feature 12) SETTING TWO-STAGE COOKING
This is a time-saving pad. It is a simplified feature
that lets you quickly set and start microwave
cooking at 100% power.
Example: To cook for one minute.
Touch: Display Shows:
1.@ .....
ADD 30 SEC
. oooK _• S-I m-I
t.0_e e_e
ADD 30 SEC
Time counting down
NOTE: Each time you touch ADD 30 SEC, it will
add 30 seconds up to 99 minutes 99 seconds.
SETTING TIMED COOKING WiTH POWER LEVEL
This feature lets you program a specific cook time
and power. For best results, there are 10 power
level settings in addition to HIGH (100%) power.
Refer to the "Microwave Power Levels" table.
NOTE: If you do not select a power level, the oven
will automatically cook at HIGH (100%) power.
Example: To cook for five minutes, 30 seconds at
80°/o power.
Touch: Display Shows:
]. Time J • e-_
I
Cook I u
P_EssSTAnT
3. Power
0
I_0 _ .......
Level i- "i-i
PRESS START
L--SL--e B--0
4. (_ i--i:e 0_l
.... / :,. :,,_,/
5. Time _:ounting d_wn
ADD 30 SEC
For best results, some recipes call for different
power levels during a cook cycle. You can
program your oven for two power level stages
during the cooking cycle
Example: To set a 2-stage cook cycle. The first stage
is a 3 minute cook time at 80°/o cook power then a
7 minute cook time at 50°/o cook power.
Touch:
1.
Time
Cook
0@
To set a 3 minute cool<
time for first stage.
Power
3.
Level
Disp_ws:
=i • __e Jj
PnESSSTART
4.
5.
®
To set an 80% cool<
power for the first stage.
Time
Cook
o.©@@
To set a 7 minute cook
power for the second stage.
Power
7. Level
PnEssSTAnT
ooe-i
r-O _j
"°1
t-I • J_
l- m_e wj
PnESS STAnT
L--I II
.
.
_nEssSTART
OL--m--e
To set a 50% cook power
for the second stage.
NOTE:You can program a "0" power
second stage for standing time inside
the oven.
_-J • e-t I-e .... :i • IJ B_e
ADD 30 SEC
Time counting down
EN-17